EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Current Status and Challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review

Naol Dessalegn Dejene, Hirpa G. Lemu

Metals · 18.02.2023 · 13 (2) · 424

DOI: 10.3390/met13020424 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 18.02.2023. Verfasst von Naol Dessalegn Dejene und 1 weiteren Autor:innen. Die Arbeit wurde bisher 174-mal zitiert (Crossref) und nennt 126 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Norwegian Agency for Development Cooperation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Powder bed fusion (PBF) is recognized as one of the most common additive manufacturing technologies because of its attractive capability of fabricating complex geometries using many possible materials. However, the quality and reliability of parts produced by this technology are observed to be crucial aspects. In addition, the challenges of PBF-produced parts are hot issues among stakeholders because parts are still insufficient to meet the strict requirements of high-tech industries. This paper discusses the present state of the art in PBF and technological challenges, with a focus on selective laser melting (SLM). The review work focuses mainly on articles that emphasize the status and challenges of PBF metal-based AM, and the study is primarily limited to open-access sources, with special attention given to the process parameters and flaws as a determining factor for printed part quality and reliability. Moreover, the common defects due to an unstrained process parameter of SLM and those needed to monitor and sustain the quality and reliability of components are encompassed. From this review work, it has been observed that there are several factors, such as laser parameters, powder characteristics, material properties of powder and the printing chamber environments, that affect the SLM printing process and the mechanical properties of printed parts. It is also concluded that the SLM process is not only expensive and slow compared with conventional manufacturing processes, but it also suffers from key drawbacks, such as its reliability and quality in terms of dimensional accuracy, mechanical strength and surface roughness.

Förderung

  • Norwegian Agency for Development Cooperation

Zitieren

APA

Dejene, N. D., & Lemu, H. G. (2023). Current Status and Challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review. Metals, 13(2), 424. https://doi.org/10.3390/met13020424

Vancouver

Dejene ND, Lemu HG. Current Status and Challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review. Metals. 2023;13(2):424. doi:10.3390/met13020424

BibTeX
@article{Dejene2023,
  author = {Dejene, Naol Dessalegn and Lemu, Hirpa G.},
  title = {Current Status and Challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {424},
  doi = {10.3390/met13020424}
}
Kostenlos starten →