EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Binary Aluminum Alloys from 1-ethyl-3-methylimidazolium-based Ionic Liquids for Cathodic Corrosion Protection

Rene Böttcher, Adriana Ispas, Andreas Bund

Metals · 13.02.2023 · 13 (2) · 377

DOI: 10.3390/met13020377 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 13.02.2023. Verfasst von Rene Böttcher und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Economic Affairs and Energy (Bundesministerium für Wirtschaft und Energie).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum cannot provide continuous cathodic corrosion protection under ambient conditions due to the formation of an insulating oxide layer and therefore it should be alloyed. Binary aluminum alloys with Cr, Zn and Sn from AlCl3/1-ethyl-3-methylimidazolium chloride ([EMIm]Cl) containing CrCl2, ZnCl2 or SnCl2 have been deposited and their morphology and composition were investigated using SEM/EDS. The corrosion behavior of alloys with 2–4 wt% Cr, Zn or Sn was investigated using potentiodynamic polarization in 3.5 wt% NaCl solution, neutral salt spray test (NSS) and environmental exposure (EE). Pure aluminum provides excellent corrosion protection of steel in a chloride-containing environment, but not under ambient conditions. AlCr alloys show poor corrosion protection while AlZn alloys provide excellent corrosion protection in the NSS test and superior cathodic protection in the EE test compared to aluminum. AlSn alloys are highly active at even low tin contents and dissolve rapidly in chloride-containing electrolytes. However, a slightly improved cathodic protection in the EE test compared to pure aluminum has been observed. The results prove the necessity of alloying aluminum to achieve effective cathodic corrosion protection under mild atmospheric conditions.

Förderung

  • Federal Ministry of Economic Affairs and Energy (Bundesministerium für Wirtschaft und Energie)

Zitieren

APA

Böttcher, R., Ispas, A., & Bund, A. (2023). Binary Aluminum Alloys from 1-ethyl-3-methylimidazolium-based Ionic Liquids for Cathodic Corrosion Protection. Metals, 13(2), 377. https://doi.org/10.3390/met13020377

Vancouver

Böttcher R, Ispas A, Bund A. Binary Aluminum Alloys from 1-ethyl-3-methylimidazolium-based Ionic Liquids for Cathodic Corrosion Protection. Metals. 2023;13(2):377. doi:10.3390/met13020377

BibTeX
@article{Bttcher2023,
  author = {Böttcher, Rene and Ispas, Adriana and Bund, Andreas},
  title = {Binary Aluminum Alloys from 1-ethyl-3-methylimidazolium-based Ionic Liquids for Cathodic Corrosion Protection},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {377},
  doi = {10.3390/met13020377}
}
Kostenlos starten →