Effects of Graphene Incorporation on the Nanoscale Structure and Mechanical Response of PVDF Membrane Models: A Molecular Dynamics Study
Membranes · 02.11.2026 · 16 (11) · 375
DOI: 10.3390/membranes16110375 ↗Kurz gefasst
Fachartikel in der Zeitschrift Membranes, online erschienen am 02.11.2026. Verfasst von Juan Ren und 1 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Poly(vinylidene fluoride) (PVDF) membranes require both suitable morphology and mechanical integrity, but changes in nanoscale geometry do not necessarily improve all loading responses. Atomistic molecular dynamics simulations were used to compare pristine PVDF and graphene/PVDF membrane models constructed from five-repeat-unit oligomers. A force-driven sedimentation procedure was used to examine the effects of lateral cell size and polymer-chain number on deposited morphology. The structural indicator was a two-dimensional projected void-area fraction. Increasing polymer-chain number reduced the projected void fraction, whereas increasing lateral cell size produced thinner deposits with greater uncovered area. Graphene-containing structures showed greater projected coverage under corresponding construction conditions. Separately prepared mechanical specimens were subjected to tensile and shear loading using identical PVDF parameters within the mechanical comparisons. The reported mean apparent tensile secant modulus was approximately 14.6% higher for the composite, a descriptive finite-rate comparison. Its peak stress averaged over three independent runs was 122.46 ± 32.57 MPa (mean ± sample standard deviation), whereas the peak of its average curve was 109.38 MPa. These results distinguish the reported initial-slope difference from peak-response variability and clarify the statistical meaning of peak load resistance. They provide an atomistic basis for discussing membrane-skeleton geometry and loading-dependent response, without constituting a prediction of water permeability, selectivity, or antifouling performance.
Zitieren
APA
Ren, J., & Pang, M. (2026). Effects of Graphene Incorporation on the Nanoscale Structure and Mechanical Response of PVDF Membrane Models: A Molecular Dynamics Study. Membranes, 16(11), 375. https://doi.org/10.3390/membranes16110375
Vancouver
Ren J, Pang M. Effects of Graphene Incorporation on the Nanoscale Structure and Mechanical Response of PVDF Membrane Models: A Molecular Dynamics Study. Membranes. 2026;16(11):375. doi:10.3390/membranes16110375
BibTeX
@article{Ren2026,
author = {Ren, Juan and Pang, Mingliang},
title = {Effects of Graphene Incorporation on the Nanoscale Structure and Mechanical Response of PVDF Membrane Models: A Molecular Dynamics Study},
journal = {Membranes},
year = {2026},
volume = {16},
number = {11},
pages = {375},
doi = {10.3390/membranes16110375}
}
EUVIMED