Engineering Vanillin-Functionalized TiO2 Nanotube–Polysulfone Membranes with Enhanced Antifouling and Water Filtration Performance
Membranes · 22.10.2026 · 16 (11) · 353
DOI: 10.3390/membranes16110353 ↗Kurz gefasst
Fachartikel in der Zeitschrift Membranes, online erschienen am 22.10.2026. Verfasst von Ibrahim Hotan Alsohaimi. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Vanillin-functionalized TiO2 nanotube–polysulfone (PolySulf–VOH@TNT) composite membranes were developed to enhance water permeability, antifouling resistance, and mechanical performance. VOH@TNTs were incorporated into a polysulfone matrix (1–7 wt%) via non-solvent-induced phase separation. Incorporating VOH@TNTs markedly improved surface hydrophilicity, reducing the water contact angle from 83° (pristine polysulfone membrane, PSM) to 59.6° (5 wt%), and increased water uptake and porosity from 36% and 38% to 61% and 52%, respectively. Mechanical strength rose from 5.3 to 8.3 MPa due to strong polymer–filler interfacial bonding. The PolySulf–VOH@TNT (5%) membrane, identified as the best-performing formulation based on its physicochemical properties and humic acid (HA) filtration performance, exhibited a pure-water flux of 195.4 L m−2 h−1, approximately 125% higher than that of pristine PSM, while achieving 98.8% HA rejection and a 19% reduction in foulant adsorption. Antifouling tests showed a flux recovery ratio (FRR) of ~91% and irreversible fouling (Rir) of ~7%. The membrane also achieved >96% rejection for humic acid (HA), bovine serum albumin (BSA), and sodium alginate (SA), maintaining ~94% flux recovery after cleaning. These enhancements result from the formation of a VOH- and Ti–OH-derived hydration layer, electrostatic repulsion, and improved pore interconnectivity. The findings demonstrate that VOH@TNT incorporation is a promising approach for improving the permeability, separation efficiency, and short-term antifouling performance of polysulfone ultrafiltration membranes under the investigated experimental conditions. However, further studies are required to establish their long-term stability, environmental safety, and practical applicability in water treatment.
Zitieren
APA
Alsohaimi, I. H. (2026). Engineering Vanillin-Functionalized TiO2 Nanotube–Polysulfone Membranes with Enhanced Antifouling and Water Filtration Performance. Membranes, 16(11), 353. https://doi.org/10.3390/membranes16110353
Vancouver
Alsohaimi IH. Engineering Vanillin-Functionalized TiO2 Nanotube–Polysulfone Membranes with Enhanced Antifouling and Water Filtration Performance. Membranes. 2026;16(11):353. doi:10.3390/membranes16110353
BibTeX
@article{Alsohaimi2026,
author = {Alsohaimi, Ibrahim Hotan},
title = {Engineering Vanillin-Functionalized TiO2 Nanotube–Polysulfone Membranes with Enhanced Antifouling and Water Filtration Performance},
journal = {Membranes},
year = {2026},
volume = {16},
number = {11},
pages = {353},
doi = {10.3390/membranes16110353}
}
EUVIMED