EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of CO2 Molecular Gate Membrane Module Systems for Pre-Combustion CO2 Capture

Teruhiko Kai, Shuhong Duan, Lie Meng iD, Masahiko Mizuno, Katsunori Yogo

Membranes · 03.06.2026 · 16 (6) · 196

DOI: 10.3390/membranes16060196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 03.06.2026. Verfasst von Teruhiko Kai und 4 weiteren Autor:innen. Beteiligte Einrichtung: Molecular Gate Membrane Module Technology Research Association (MGMTRA), 9-2 Kizugawadai, Kizugawa-shi 619-0292, Kyoto, Japan. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: New Energy and Industrial Technology Development Organization, NEDO.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Research and development of novel CO2-selective membranes, called molecular gate membranes (MGMs), has been conducted. Unlike conventional CO2-selective membranes, MGMs show exceptionally high CO2 separation over H2. The membranes and the membrane modules were developed for CO2 separation at low energy consumption and low cost in pre-combustion processes such as integrated gasification combined cycle (IGCC) and hydrogen production. To date, two candidate membrane materials—poly(ethylene glycol) (PEG)-based and poly(vinyl alcohol) (PVA)-based membranes—have been used. As for PEG-based membrane materials, the effect of operating conditions, such as relative humidity in feed gas and sweep gas and operating pressure, on CO2 separation performance were investigated. Both CO2 permeance and selectivity increased with increasing relative humidity on both the feed and permeate sides. The CO2 permeance increased from the 10−12 to the 10−11 order, while the selectivity increased from 2.8 to 25. In addition, it was found that the water vapor permeates from the high to the low relative humidity side with a permeance typically on the order of 10−8 m3(STP)m−2·s−1·Pa−1, regardless of the total pressure difference between the feed side and the permeate side. This finding is important in the design of membrane systems. However, we found that PVA-based membranes exhibited superior thin-film coating ability and higher separation performance compared with PEG-based membranes. As for PVA-based materials, membranes that showed high CO2 separation performance under high-pressure conditions of 2.4 MPa (the supposed pressure in the IGCC process) were successfully prepared. In addition, the technology to prepare MGMs with a large membrane area was developed by a continuous membrane-forming method, and the membrane elements (diameter: 10–20 cm; length: 20–60 cm) were also fabricated. Pre-combustion CO2 capture tests of the membrane elements were conducted using coal-derived gasification gas, and it was confirmed that the membrane elements were durable against the real gas, which contained components such as H2S (on the order of 100 ppm) and CO (32.4%).

Schlagwörter

Stichwörter der Autor:innen

CO2/H2 separationcarbon capturemembranepre-combustion

Autor:innen und Institutionen

  • Molecular Gate Membrane Module Technology Research Association (MGMTRA), 9-2 Kizugawadai, Kizugawa-shi 619-0292, Kyoto, Japan.

ORCID-Profile: Lie Meng

Förderung

  • New Energy and Industrial Technology Development Organization
  • NEDO

Zitieren

APA

Kai, T., Duan, S., Meng, L., Mizuno, M., & Yogo, K. (2026). Development of CO2 Molecular Gate Membrane Module Systems for Pre-Combustion CO2 Capture. Membranes, 16(6), 196. https://doi.org/10.3390/membranes16060196

Vancouver

Kai T, Duan S, Meng L, Mizuno M, Yogo K. Development of CO2 Molecular Gate Membrane Module Systems for Pre-Combustion CO2 Capture. Membranes. 2026;16(6):196. doi:10.3390/membranes16060196

BibTeX
@article{Kai2026,
  author = {Kai, Teruhiko and Duan, Shuhong and Meng, Lie and Mizuno, Masahiko and Yogo, Katsunori},
  title = {Development of CO2 Molecular Gate Membrane Module Systems for Pre-Combustion CO2 Capture},
  journal = {Membranes},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {196},
  doi = {10.3390/membranes16060196}
}
Kostenlos starten →