EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation of GO–PAMAM-Modified Polysulfone Substrate-Based Thin-Film Composite Reverse-Osmosis Membranes for Desalination

Mohd Muzammil Zubair, Syed Javaid Zaidi

Membranes · 28.05.2026 · 16 (6) · 184

DOI: 10.3390/membranes16060184 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 28.05.2026. Verfasst von Mohd Muzammil Zubair und 1 weiteren Autor:innen. Beteiligte Einrichtung: UNESCO Chair in Desalination and Water Treatment, Center for Advanced Material, Qatar University, Doha P.O. Box 2713, Qatar. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Qatar University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Freshwater scarcity driven by population growth and industrial demand has increased reliance on desalination, where reverse osmosis (RO) is widely applied due to its high separation efficiency. Membrane performance is governed by the balance between water permeability and solute rejection, and attempts to improve this relationship have focused on incorporating nanomaterials to modify membrane structure and transport behavior. In this study, a computational investigation was carried out for thin-film composite (TFC) membranes incorporating graphene oxide–poly(amidoamine) (GO–PAMAM) within the polysulfone substrate to examine its influence on transport under RO conditions. A two-dimensional model was implemented in COMSOL Multiphysics by coupling the Laminar Flow and Transport of Diluted Species interfaces, while permeation across the membrane was described using a solution–diffusion framework parameterized by experimentally determined salt permeability coefficient. Variation in GO–PAMAM loading (0–0.10 wt%) was introduced through intrinsic permeability parameters, enabling direct comparison with experimental data. The simulations reproduced the observed trends, with the membrane containing 0.06 wt% GO–PAMAM showing higher salt rejection, increasing from 78.16% to 90.08% relative to the pristine membrane. The model predicted lower permeate-side solute concentration and a decrease in salt rejection along the membrane length. Model predictions agreed with experiments, with mean relative errors of 1.23% for salt rejection and 7.41% for water flux, demonstrating the ability of the model to capture transport behavior in GO–PAMAM-modified TFC membranes.

Schlagwörter

Stichwörter der Autor:innen

computational fluid dynamics (CFD)polysulfone substratereverse osmosis (RO)salt rejectionthin-film composite (TFC)

Autor:innen und Institutionen

  • UNESCO Chair in Desalination and Water Treatment, Center for Advanced Material, Qatar University, Doha P.O. Box 2713, Qatar.
  • Department of Mechanical and Industrial Engineering, Qatar University, Doha P.O. Box 2713, Qatar.

Förderung

  • Qatar University

Zitieren

APA

Zubair, M. M., & Zaidi, S. J. (2026). Simulation of GO–PAMAM-Modified Polysulfone Substrate-Based Thin-Film Composite Reverse-Osmosis Membranes for Desalination. Membranes, 16(6), 184. https://doi.org/10.3390/membranes16060184

Vancouver

Zubair MM, Zaidi SJ. Simulation of GO–PAMAM-Modified Polysulfone Substrate-Based Thin-Film Composite Reverse-Osmosis Membranes for Desalination. Membranes. 2026;16(6):184. doi:10.3390/membranes16060184

BibTeX
@article{Zubair2026,
  author = {Zubair, Mohd Muzammil and Zaidi, Syed Javaid},
  title = {Simulation of GO–PAMAM-Modified Polysulfone Substrate-Based Thin-Film Composite Reverse-Osmosis Membranes for Desalination},
  journal = {Membranes},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {184},
  doi = {10.3390/membranes16060184}
}
Kostenlos starten →