EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Technical Feasibility Study of the Recovery of Used Lubricant Oil Using Ceramic Ultrafiltration Membranes

Madina Mohamed iD, Pieter Vandezande, Anita Buekenhoudt

Membranes · 01.05.2026 · 16 (5) · 164

DOI: 10.3390/membranes16050164 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 01.05.2026. Verfasst von Madina Mohamed und 2 weiteren Autor:innen. Beteiligte Einrichtung: Flemish Institute for Technological Research NV (VITO), Materials and Chemistry (MATCH), Boeretang 200, B-2400 Mol, Belgium. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EU, European Commission.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This laboratory-scale experimental study investigated the purification level of used lubricant oil (ULO) filtration using a large variety of ceramic UF membranes, allowing for treatment at high temperatures unreachable for polymeric membranes. Varying pore sizes (5 nm, 10 nm, 30 nm, and 100 nm) were included as well as a range of materials (Al2O3, TiO2, and ZrO2). Moreover, four different grafting techniques were applied to alter the surface chemistry of the native membranes from hydrophilic to more hydrophobic or oleophilic, intending to further increase UF flux and/or retention. Benchmark native 10 nm TiO2 membranes shows a stable flux of 7 to 9 kg/h·m2 at 110 °C, strong (metal) impurity removal, and unexpected high water retention. All other membranes tested show fluxes that never exceed the ones for the 10 nm benchmark membranes, elucidating that surface chemistry does not help to improve the flux. In general, membrane performance is very similar for all membranes, except for flux and water retention. Systematically, high-flux membranes show high water retention, while very-low-flux membranes preferentially pass water. The variation in flux and water retention as a function of membrane pore size (before grafting) shows that surface chemistry only plays a role when the effective pore size becomes small. The study results allow for the selection of the best membranes for initial ULO treatment.

Schlagwörter

Stichwörter der Autor:innen

ceramic membranemembrane fluxmembrane graftingused lubricant oil

Autor:innen und Institutionen

  • Flemish Institute for Technological Research NV (VITO), Materials and Chemistry (MATCH), Boeretang 200, B-2400 Mol, Belgium.

ORCID-Profile: Madina Mohamed

Förderung

  • EU
  • European Commission

Zitieren

APA

Mohamed, M., Vandezande, P., & Buekenhoudt, A. (2026). A Technical Feasibility Study of the Recovery of Used Lubricant Oil Using Ceramic Ultrafiltration Membranes. Membranes, 16(5), 164. https://doi.org/10.3390/membranes16050164

Vancouver

Mohamed M, Vandezande P, Buekenhoudt A. A Technical Feasibility Study of the Recovery of Used Lubricant Oil Using Ceramic Ultrafiltration Membranes. Membranes. 2026;16(5):164. doi:10.3390/membranes16050164

BibTeX
@article{Mohamed2026,
  author = {Mohamed, Madina and Vandezande, Pieter and Buekenhoudt, Anita},
  title = {A Technical Feasibility Study of the Recovery of Used Lubricant Oil Using Ceramic Ultrafiltration Membranes},
  journal = {Membranes},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {164},
  doi = {10.3390/membranes16050164}
}
Kostenlos starten →