Development of High-Performance Catalytic Ceramic Membrane Microchannel Reactor for Carbon Dioxide Conversion to Methanol
Membranes · 17.01.2026 · 16 (1) · 45
DOI: 10.3390/membranes16010045 ↗Kurz gefasst
Fachartikel in der Zeitschrift Membranes, online erschienen am 17.01.2026. Verfasst von Aubaid Ullah und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universiti Malaya through UM International Collaboration Grant, UM International Collaboration.
Abstract (Originalsprache)
Conversion of carbon dioxide (CO2) to methanol in a traditional reactor (TR) with catalytic packed bed faces the challenge of lower reactant conversion due to thermodynamic limitations. On the contrary, membrane reactors selectively remove reaction products, enhancing the conversion, but it is still limited, and existing designs face challenges of structural integrity and scale-up complications. Therefore, for the first time, a ceramic membrane microchannel reactor (CMMR) system was developed with 500 µm deep microchannels, incorporated with catalytic membrane for CO2 conversion to methanol. Computational fluid dynamic (CFD) simulations confirmed the uniform flow distribution among the microchannels. A catalytic LTA zeolite membrane was synthesized with thin layer (~45 µm) of Cu-ZnO-Al2O3 catalyst coating and tested at a temperature of 220 °C and 3.0 MPa pressure. The results showed a significantly higher CO2 conversion of 82%, which is approximately 10 times higher than TR and 3 times higher than equilibrium conversion while 1.5 times higher than conventional tubular membrane reactor. Additionally, methanol selectivity and yield were achieved as 51.6% and 42.3%, respectively. The research outputs showed potential of replacing the current industrial process of methanol synthesis, addressing the Sustainable Development Goals of SDG-7, 9, and 13 for clean energy, industry innovation, and climate action, respectively.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia.
- Sustainable Process Engineering Centre (SPEC), Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia.
- Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia.
ORCID-Profile: Nur Awanis Hashim, Mohamad Fairus Rabuni, Mohd Usman Mohd Junaidi, Ammar Ahmed, Mustapha Grema Mohammed, Muhammed Sahal Siddique
Förderung
- Universiti Malaya through UM International Collaboration Grant
- UM International Collaboration
Zitieren
APA
Ullah, A., Hashim, N. A., Rabuni, M. F., Junaidi, M. U. M., Ahmed, A., Mohammed, M. G., & Siddique, M. S. (2026). Development of High-Performance Catalytic Ceramic Membrane Microchannel Reactor for Carbon Dioxide Conversion to Methanol. Membranes, 16(1), 45. https://doi.org/10.3390/membranes16010045
Vancouver
Ullah A, Hashim NA, Rabuni MF, Junaidi MUM, Ahmed A, Mohammed MG, et al. Development of High-Performance Catalytic Ceramic Membrane Microchannel Reactor for Carbon Dioxide Conversion to Methanol. Membranes. 2026;16(1):45. doi:10.3390/membranes16010045
BibTeX
@article{Ullah2026,
author = {Ullah, Aubaid and Hashim, Nur Awanis and Rabuni, Mohamad Fairus and Junaidi, Mohd Usman Mohd and Ahmed, Ammar and Mohammed, Mustapha Grema and Siddique, Muhammed Sahal},
title = {Development of High-Performance Catalytic Ceramic Membrane Microchannel Reactor for Carbon Dioxide Conversion to Methanol},
journal = {Membranes},
year = {2026},
volume = {16},
number = {1},
pages = {45},
doi = {10.3390/membranes16010045}
}
EUVIMED