Polysulfone/MMT Clay Mixed Matrix Membranes for Efficient Diclofenac Removal and Improved Antifouling Performance in Wastewater Treatment
Membranes · 18.11.2025 · 15 (11) · 344
DOI: 10.3390/membranes15110344 ↗Kurz gefasst
Fachartikel in der Zeitschrift Membranes, online erschienen am 18.11.2025. Verfasst von Zouhair Salah und 4 weiteren Autor:innen. Beteiligte Einrichtung: Research Unit 'Advanced Technologies for Environment and Smart Cities', Faculty of Sciences of Sfax, University of Sfax, Sfax 3000, Tunisia. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Due to industrialization and globalization, water sources are increasingly contaminated with drugs. Among the various methods available, adsorption remains one of the most widely used techniques for drug removal. This work was to develop polysulfone (PSF) membranes integrated with montmorillonite (MMT) clay. The fabricated membranes were subsequently evaluated for their performance in removing diclofenac (DCF) from aqueous solutions. The membranes were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), contact angle measurements, as well as chemical and mechanical tests. Adding MMT at 1.5 and 2 wt% improved both hydrophilicity and mechanical strength. The natural hydrophilicity of MMT also accelerates the non-solvent/solvent exchange during phase inversion, resulting in higher porosity. These structural and surface modifications increased water permeability (16.36 L·m−2·h−1·bar−1), achieved 79% DCF removal, and enhanced antifouling properties. However, increasing the MMT clay content to 2.5 wt% caused particle aggregation, which reduced membrane performance. Fouling resistance tests with bovine serum albumin (BSA) as a model foulant showed a rejection rate of 89% and a flux recovery ratio (FRR) above 82% using an optimized membrane. These findings demonstrate that PSF/MMT membranes can serve as promising candidates for sustainable pharmaceutical wastewater treatment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Unit 'Advanced Technologies for Environment and Smart Cities', Faculty of Sciences of Sfax, University of Sfax, Sfax 3000, Tunisia.
- Department of Chemical, Preparatory Institute for Engineering Studies of Gabes, University of Gabes, Gabes 6029, Tunisia.
- Institute on Membrane Technology, National Research Council of Italy (ITM-CNR), Cubo 17C, Via Pietro Bucci, 87036 Rende, Italy.
- Institut de Chimie et des Matériaux Paris Est, ICMPE UMR-CNRS 7182-UPEC, Université Paris-Est Créteil, 2 rue Henri Dunant, 94320 Thiais, France.
ORCID-Profile: Zouhair Salah, Catia Algieri, Lasaad Dammak
Zitieren
APA
Salah, Z., Aloulou, H., Algieri, C., Dammak, L., & Ben Amar, R. (2025). Polysulfone/MMT Clay Mixed Matrix Membranes for Efficient Diclofenac Removal and Improved Antifouling Performance in Wastewater Treatment. Membranes, 15(11), 344. https://doi.org/10.3390/membranes15110344
Vancouver
Salah Z, Aloulou H, Algieri C, Dammak L, Ben Amar R. Polysulfone/MMT Clay Mixed Matrix Membranes for Efficient Diclofenac Removal and Improved Antifouling Performance in Wastewater Treatment. Membranes. 2025;15(11):344. doi:10.3390/membranes15110344
BibTeX
@article{Salah2025,
author = {Salah, Zouhair and Aloulou, Hajer and Algieri, Catia and Dammak, Lasaad and Ben Amar, Raja},
title = {Polysulfone/MMT Clay Mixed Matrix Membranes for Efficient Diclofenac Removal and Improved Antifouling Performance in Wastewater Treatment},
journal = {Membranes},
year = {2025},
volume = {15},
number = {11},
pages = {344},
doi = {10.3390/membranes15110344}
}
EUVIMED