EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electro-Spun Waste Polystyrene/Steel Slag Composite Membrane for Water Desalination: Modelling and Photothermal Activity Evaluation

Salma Tarek Ghaly iD, Usama Nour Eldemerdash, Ahmed H El-Shazly

Membranes · 28.09.2025 · 15 (10) · 294

DOI: 10.3390/membranes15100294 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 28.09.2025. Verfasst von Salma Tarek Ghaly und 2 weiteren Autor:innen. Beteiligte Einrichtung: Chemical and Petrochemicals Engineering Department, Egypt-Japan University of Science and Technology, New Borg El-Arab City 21934, Egypt. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science, Technology & Inno-742 vation Funding Authority, Science, Technology & Innovation Funding Authority.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic waste and industrial residues like steel slag pose significant environmental challenges, with limited recycling solutions. This study investigates a sustainable approach by repurposing waste polystyrene and steel slag into composite membranes via electrospinning for membrane distillation applications. Steel slag incorporation enhanced membrane porosity, hydrophobicity, and thermal stability, with process optimization performed through response surface methodology by varying slag content (0–10 wt%), voltage (15–30 kV), and feed rate (0.18–10 mL·h−1). Optimized membranes achieved a reduced fiber diameter (1.172 µm), high porosity (82.3%), and superior hydrophobicity (contact angle 102.2°). Mechanical performance improved with a 12% increase in tensile strength and a threefold rise in liquid entry pressure over pure polystyrene membranes, indicating greater durability and wetting resistance. In direct contact membrane distillation, water flux improved by 15% while maintaining salt rejection above 98%. Under photothermal membrane distillation, evaporation rates rose by 69% and solar-to-thermal conversion efficiency by 60% compared to standard PVDF membranes. These results demonstrate the feasibility of transforming waste materials into high-performance, durable membranes, offering a scalable and eco-friendly solution for sustainable desalination.

Schlagwörter

Stichwörter der Autor:innen

electrospinningmembrane distillationsteel slagwaste polystyrenewater desalination

Autor:innen und Institutionen

  • Chemical and Petrochemicals Engineering Department, Egypt-Japan University of Science and Technology, New Borg El-Arab City 21934, Egypt.
  • Central Metallurgical Research and Development Institute (CMRDI), P.O. Box 87, Helwan 11722, Egypt.
  • Faculty of Engineering, Benha University, Beha 13511, Egypt.
  • Chemical Engineering Department, Faculty of Engineering, Alexandria University, Alexandria 21544, Egypt.

ORCID-Profile: Salma Tarek Ghaly

Förderung

  • Science, Technology & Inno-742 vation Funding Authority
  • Science, Technology & Innovation Funding Authority

Zitieren

APA

Ghaly, S. T., Eldemerdash, U. N., & El-Shazly, A. H. (2025). Electro-Spun Waste Polystyrene/Steel Slag Composite Membrane for Water Desalination: Modelling and Photothermal Activity Evaluation. Membranes, 15(10), 294. https://doi.org/10.3390/membranes15100294

Vancouver

Ghaly ST, Eldemerdash UN, El-Shazly AH. Electro-Spun Waste Polystyrene/Steel Slag Composite Membrane for Water Desalination: Modelling and Photothermal Activity Evaluation. Membranes. 2025;15(10):294. doi:10.3390/membranes15100294

BibTeX
@article{Ghaly2025,
  author = {Ghaly, Salma Tarek and Eldemerdash, Usama Nour and El-Shazly, Ahmed H},
  title = {Electro-Spun Waste Polystyrene/Steel Slag Composite Membrane for Water Desalination: Modelling and Photothermal Activity Evaluation},
  journal = {Membranes},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {294},
  doi = {10.3390/membranes15100294}
}
Kostenlos starten →