EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and Evaluation of Ceramic-Based Hollow Fiber Membrane Modules for Hemodialysis Applications

Jae Yeon Hwang iD, Sung Woo Han iD, Seung Hee Huh, So Hee Park, Sang Min Park, Jung Hoon Park iD

Membranes · 26.08.2025 · 15 (9) · 251

DOI: 10.3390/membranes15090251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 26.08.2025. Verfasst von Jae Yeon Hwang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biochemical Engineering, Dongguk University, Pildong-ro 1-gil, Jung-gu, Seoul 04620, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, The Ministry of Trade, Industry and Energy (MOTIE, Republic of Korea).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The application of ceramic membranes in hemodialysis modules remains underexplored, as prior investigations have primarily concentrated on flat-sheet samples or small-scale assessments. This study advances the field by fabricating Al2O3 hollow fiber membranes, integrating them into a lab-scale module, and systematically evaluating the influence of sintering temperature on their structural characteristics, hemocompatibility, and dialysis performance. Al2O3 hollow fiber membranes were prepared using a phase inversion method and then sintered at three different temperatures. All membranes exhibited superior protein adsorption behavior compared to conventional polymer-based membranes, which indicates higher biocompatibility. Furthermore, the amount of adsorbed protein decreased with increasing sintering temperature. This suggests that the amount of protein adsorption can be controlled by adjusting the heat treatment conditions. The lab-scale hemodialyzer integrated with a membrane sintered at 1200 °C achieved the fastest urea removal rate of approximately 90% in 2 h and reached a Kt/V value of 1.1 after 60 min, which is comparable to the performance of commercial polymer-based hemodialyzers.

Schlagwörter

Stichwörter der Autor:innen

biocompatibilityceramic hollow fiberhemodialysis membraneprotein adsorptionsintering temperatureuremic toxin removal

Autor:innen und Institutionen

  • Department of Chemical and Biochemical Engineering, Dongguk University, Pildong-ro 1-gil, Jung-gu, Seoul 04620, Republic of Korea.

ORCID-Profile: Jae Yeon Hwang, Sung Woo Han, Jung Hoon Park

Förderung

  • Ministry of Trade, Industry and Energy
  • The Ministry of Trade, Industry and Energy (MOTIE, Republic of Korea)

Zitieren

APA

Hwang, J. Y., Han, S. W., Huh, S. H., Park, S. H., Park, S. M., & Park, J. H. (2025). Fabrication and Evaluation of Ceramic-Based Hollow Fiber Membrane Modules for Hemodialysis Applications. Membranes, 15(9), 251. https://doi.org/10.3390/membranes15090251

Vancouver

Hwang JY, Han SW, Huh SH, Park SH, Park SM, Park JH. Fabrication and Evaluation of Ceramic-Based Hollow Fiber Membrane Modules for Hemodialysis Applications. Membranes. 2025;15(9):251. doi:10.3390/membranes15090251

BibTeX
@article{Hwang2025,
  author = {Hwang, Jae Yeon and Han, Sung Woo and Huh, Seung Hee and Park, So Hee and Park, Sang Min and Park, Jung Hoon},
  title = {Fabrication and Evaluation of Ceramic-Based Hollow Fiber Membrane Modules for Hemodialysis Applications},
  journal = {Membranes},
  year = {2025},
  volume = {15},
  number = {9},
  pages = {251},
  doi = {10.3390/membranes15090251}
}
Kostenlos starten →