Pilot-Scale Polysulfone Ultrafiltration Patterned Membranes: Phase-Inversion Parametric Optimization on a Roll-to-Roll Casting System
Membranes · 31.07.2025 · 15 (8) · 228
DOI: 10.3390/membranes15080228 ↗Kurz gefasst
Fachartikel in der Zeitschrift Membranes, online erschienen am 31.07.2025. Verfasst von Ayesha Ilyas und 1 weiteren Autor:innen. Beteiligte Einrichtung: Membrane Technology Group (MTG), Division cMACS, Faculty of Bioscience Engineering, KU Leuven, Celestijnenlaan 200F, P.O. Box 2454, 3001 Leuven, Belg…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: KU Leuven, European Union, Flanders Innovation and Entrepreneurship.
Abstract (Originalsprache)
The scalability and processability of high-performance membranes remain significant challenges in membrane technology. This work focuses on optimizing the pilot-scale production of patterned polysulfone (PSf) ultrafiltration membranes using the spray-modified non-solvent-induced phase separation (s-NIPS) method on a roll-to-roll pilot line. s-NIPS has already been studied extensively at lab-scale to prepare patterned membranes for various applications including membrane bioreactors (MBR), reverse osmosis (RO) and forward osmosis (FO). Although studied at the lab scale, membranes prepared at a larger scale can significantly differ in performance; therefore, phase inversion parameters, including polymer concentration, molecular weight, and additive type (i.e., polyethylene glycol (PEG) or polyvinylpyrolidine (PVP)) and concentration, were systematically varied when casting on a roll-to-roll, 12″ wide pilot line to identify optimal conditions for achieving defect-free, high-performance, patterned PSf membranes. The membranes were characterized for their pure water permeance, BSA rejection, casting solution viscosities, and resulting morphology. s-NIPS patterned membranes exhibit 150–350% increase in water flux as compared to their reference flat membrane, thanks to very high pattern heights up to 825 µm and formation of finger-like macrovoids. This work bridges the gap between lab-scale and pilot-scale membrane preparation, while proposing an upscaled membrane with great potential for use in water treatment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Membrane Technology Group (MTG), Division cMACS, Faculty of Bioscience Engineering, KU Leuven, Celestijnenlaan 200F, P.O. Box 2454, 3001 Leuven, Belgium.
ORCID-Profile: Ivo F J Vankelecom
Förderung
- KU Leuven
- European Union
- Flanders Innovation and Entrepreneurship
- Research Foundation - Flanders
- the European Union
- Fonds Wetenschappelijk Onderzoek (FWO)
- Industrieel onderzoek fonds (IOF)-Onderzoeksraad
- KU Leuven and Agentschap Innoveren and Ondernemen (VLAIO)
Zitieren
APA
Ilyas, A., & Vankelecom, I. F. J. (2025). Pilot-Scale Polysulfone Ultrafiltration Patterned Membranes: Phase-Inversion Parametric Optimization on a Roll-to-Roll Casting System. Membranes, 15(8), 228. https://doi.org/10.3390/membranes15080228
Vancouver
Ilyas A, Vankelecom IFJ. Pilot-Scale Polysulfone Ultrafiltration Patterned Membranes: Phase-Inversion Parametric Optimization on a Roll-to-Roll Casting System. Membranes. 2025;15(8):228. doi:10.3390/membranes15080228
BibTeX
@article{Ilyas2025,
author = {Ilyas, Ayesha and Vankelecom, Ivo F J},
title = {Pilot-Scale Polysulfone Ultrafiltration Patterned Membranes: Phase-Inversion Parametric Optimization on a Roll-to-Roll Casting System},
journal = {Membranes},
year = {2025},
volume = {15},
number = {8},
pages = {228},
doi = {10.3390/membranes15080228}
}
EUVIMED