EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Green PVDF/TiO2 Composite Membrane for Water Treatment

Shuhang Lu, Dong Zou

Membranes · 21.07.2025 · 15 (7) · 218

DOI: 10.3390/membranes15070218 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 21.07.2025. Verfasst von Shuhang Lu und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental Science and Engineering, Nanjing Tech University, Nanjing 211816, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PVDF/TiO2 composite membranes show some potential to be used for water treatment as they combine the advantages of polymers and ceramics. However, conventional PVDF-based composite membranes are always fabricated by using conventional toxic solvents. Herein, PolarClean was used as a green solvent to fabricate PVDF/TiO2 composite membranes via the phase inversion method. In this process, Pluronic F127 was used as a dispersion agent to distribute TiO2 particles in the PVDF matrix and to serve as a pore former on the membrane surface. TiO2 particles were well distributed on the membrane surface and bulk. TiO2 particles in the PVDF matrix enhanced the mechanical strength and hydrophilic characteristics of the resulting composite membrane, facilitating water transport through the composite membranes and enhancing their water permeability. Membrane microstructures and mechanical strength of the composite membranes were finely tuned by varying the PVDF concentration, TiO2 concentration, and coagulation bath temperature. It was demonstrated that the resulting green PVDF/TiO2 composite membrane showed a high water permeance compared with those using conventional toxic solvents in terms of its small pore size. In addition, the particle rejection of green PVDF/TiO2 membrane showed a 99.9% rejection rate in all the filtration process, while those using NMP showed 91.1% after 30 min of filtration. The water flux was similar at 121 and 130 Lm−2h−1 for green and conventional solvents, respectively. This work provides important information for the future application of sustainable membranes.

Schlagwörter

Stichwörter der Autor:innen

PVDF/TiO2 membranesgreen solventphase inversion methodwater treatment

Autor:innen und Institutionen

  • School of Environmental Science and Engineering, Nanjing Tech University, Nanjing 211816, China.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Lu, S., & Zou, D. (2025). Fabrication of Green PVDF/TiO2 Composite Membrane for Water Treatment. Membranes, 15(7), 218. https://doi.org/10.3390/membranes15070218

Vancouver

Lu S, Zou D. Fabrication of Green PVDF/TiO2 Composite Membrane for Water Treatment. Membranes. 2025;15(7):218. doi:10.3390/membranes15070218

BibTeX
@article{Lu2025,
  author = {Lu, Shuhang and Zou, Dong},
  title = {Fabrication of Green PVDF/TiO2 Composite Membrane for Water Treatment},
  journal = {Membranes},
  year = {2025},
  volume = {15},
  number = {7},
  pages = {218},
  doi = {10.3390/membranes15070218}
}
Kostenlos starten →