Thermal Lamination of Electrospun Nanofiber Membrane with Woven Fabric and Yarn Embedding Effect
Membranes · 20.03.2025 · 15 (3) · 95
DOI: 10.3390/membranes15030095 ↗Kurz gefasst
Fachartikel in der Zeitschrift Membranes, online erschienen am 20.03.2025. Verfasst von Ziyuan Gao und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China, Science and Technology Program of Cangzhou.
Abstract (Originalsprache)
This study investigated the effectiveness of two lamination methods for integrating electrospun nanofiber membranes with woven nylon fabric for personal protective applications. The first method used a thermoplastic urethane (TPU) nonwoven adhesive, while the second method incorporated both the adhesive and a yarn, with the yarn embedding by sewing. Lamination with the TPU nonwoven adhesive slightly improved the adhesion between the nanofiber membrane and the nylon fabric. However, it decreased the air permeability, with the degree of the decrease depending on the areal density of the TPU adhesive. As the areal density of the TPU increased from 10 g/m2 to 30 g/m2, the air permeability decreased from 107.6 mm/s to 43.4 mm/s. The lamination resulted in a slight increase in the filtration efficiency for oil aerosol particles (0.3 µm, PM0.3, at a flow rate of 32 L/min) to 96.4%, with a pressure drop of 83 Pa. Embedding non-fusible yarns in the laminate increased the nanofiber/fabric adhesion and permeability. Still, the filtration efficiency and pressure drop were reduced to 74.4% and 38 Pa, respectively, due to numerous pinholes formed in the nanofiber layer during the sewing process. Conversely, incorporating fusible TPU yarns not only improved the interlayer adhesion by 175% compared to using TPU fabric adhesive alone but also increased the air permeability to 136.1 mm/s. However, the filtration performance (87.7%, 72 Pa) was slightly lower than that of the unlaminated nanofiber/fabric pack because the TPU yarns sealed the pinholes during lamination. Lamination embedded with hot-melt yarns provides a versatile approach for combining nanofiber membranes with conventional fabrics. It can be used to develop nanofiber-functionalized textiles for a wide range of applications, including fire protection, electrical insulation, sound absorption, filtration, marine applications, and more.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China.
- The Key Laboratory of Hollow Fiber Membrane Materials and Membrane Processes, Ministry of Education, Tiangong University, Tianjin 300387, China.
- Research Institute of Cangzhou, Tiangong University, Cangzhou 061014, China.
- School of Chemical Engineering and Technology, Tiangong University, Tianjin 300387, China.
ORCID-Profile: Xin Wei, Kaikai Chen
Förderung
- Natural Science Foundation of China
- Science and Technology Program of Cangzhou
Zitieren
APA
Gao, Z., Xu, L., Wang, H., Wei, X., Chen, K., Wang, W., Zhang, S., & Lin, T. (2025). Thermal Lamination of Electrospun Nanofiber Membrane with Woven Fabric and Yarn Embedding Effect. Membranes, 15(3), 95. https://doi.org/10.3390/membranes15030095
Vancouver
Gao Z, Xu L, Wang H, Wei X, Chen K, Wang W, et al. Thermal Lamination of Electrospun Nanofiber Membrane with Woven Fabric and Yarn Embedding Effect. Membranes. 2025;15(3):95. doi:10.3390/membranes15030095
BibTeX
@article{Gao2025,
author = {Gao, Ziyuan and Xu, Le and Wang, Hongxia and Wei, Xin and Chen, Kaikai and Wang, Wenyu and Zhang, Suzhen and Lin, Tong},
title = {Thermal Lamination of Electrospun Nanofiber Membrane with Woven Fabric and Yarn Embedding Effect},
journal = {Membranes},
year = {2025},
volume = {15},
number = {3},
pages = {95},
doi = {10.3390/membranes15030095}
}
EUVIMED