EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Palladium Recovery Rates in Industrial Residual Solutions through Electrodialysis

Pauline Zimmermann iD, Önder Tekinalp, Øivind Wilhelmsen, Liyuan Deng iD, Odne Stokke Burheim iD

Membranes · 26.10.2023 · 13 (11) · 859

DOI: 10.3390/membranes13110859 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 26.10.2023. Verfasst von Pauline Zimmermann und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Research Council of Norway, Research Council of Norway (RCN-BIA).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Palladium is a vital commodity in the industry. To guarantee a stable supply in the future, it is imperative to adopt more effective recycling practices. In this proof-of-concept study, we explore the potential of electrodialysis to enhance the palladium concentration in a residual solution of palladium recycling, thus promoting higher recovery rates. Experiments were conducted using an industrial hydrochloric acid solution containing around 1000 mg/L of palladium, with a pH below 1. Two sets of membranes, Selemion AMVN/CMVN and Fujifilm Type 12 AEM/CEM, were tested at two current levels. The Fujifilm membranes, which are designed for low permeability of water, show promising results, recovering around 40% of palladium within a two-hour timeframe. The Selemion membranes were inefficient due to excessive water transport. All membranes accumulated palladium in their structures. Anion-exchange membranes showed higher palladium accumulation at lower currents, while cation-exchange membranes exhibited increased palladium accumulation at higher currents. Owing to the low concentration of palladium and the presence of abundant competing ions, the current efficiency remained below 2%. Our findings indicate a strong potential for augmenting the palladium stage in industrial draw solutions through electrodialysis, emphasizing the importance of membrane properties and process parameters to ensure a viable process. Beyond the prominent criteria of high permselectivity and low resistance, minimizing the permeability of water within IEMs remains a key challenge to mitigating the efficiency loss associated with uncontrolled mixing of the electrolyte solution.

Schlagwörter

Stichwörter der Autor:innen

anion exchange membraneelectrodialysisenergy consumptionpalladiumrecovery

Autor:innen und Institutionen

  • Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway.
  • Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway.
  • Department of Chemistry, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway.

ORCID-Profile: Pauline Zimmermann, Liyuan Deng, Odne Stokke Burheim

Förderung

  • The Research Council of Norway
  • Research Council of Norway (RCN-BIA)

Zitieren

APA

Zimmermann, P., Tekinalp, Ö., Wilhelmsen, Ø., Deng, L., & Burheim, O. S. (2023). Enhancing Palladium Recovery Rates in Industrial Residual Solutions through Electrodialysis. Membranes, 13(11), 859. https://doi.org/10.3390/membranes13110859

Vancouver

Zimmermann P, Tekinalp Ö, Wilhelmsen Ø, Deng L, Burheim OS. Enhancing Palladium Recovery Rates in Industrial Residual Solutions through Electrodialysis. Membranes. 2023;13(11):859. doi:10.3390/membranes13110859

BibTeX
@article{Zimmermann2023,
  author = {Zimmermann, Pauline and Tekinalp, Önder and Wilhelmsen, Øivind and Deng, Liyuan and Burheim, Odne Stokke},
  title = {Enhancing Palladium Recovery Rates in Industrial Residual Solutions through Electrodialysis},
  journal = {Membranes},
  year = {2023},
  volume = {13},
  number = {11},
  pages = {859},
  doi = {10.3390/membranes13110859}
}
Kostenlos starten →