EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Blended Perfluorinated Sulfonic Acid Ionomer Binder on the Performance of Catalyst Layers in Polymer Electrolyte Membrane Fuel Cells

Beom-Seok Kim, Jong-Hyeok Park iD, Jin-Soo Park iD

Membranes · 13.09.2023 · 13 (9) · 794

DOI: 10.3390/membranes13090794 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 13.09.2023. Verfasst von Beom-Seok Kim und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Green Chemical Engineering, College of Engineering, Sangmyung University, Cheonan 31066, Republic of Korea. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sangmyung University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, blended perfluorinated sulfonic acid (PFSA) ionomers with equivalent weights (EWs, g/mol) of ~1000, 980, and 830 are prepared. Catalyst layers (CLs), using blended PFSA ionomers, with different side chain lengths and EWs are investigated and compared to CLs using single ionomers. The ion exchange capacity results confirm that blended ionomers have the target EWs. As a result, blended ionomers exhibit higher ion conductivity than single ionomers at all temperatures due to the higher water uptake of the blended ionomers. This implies that blended ionomers have a bulk structure to form a competent free volume compared to single ionomers. Blended ionomers with short side chains and low EWs can help reduce the activation energy in proton conduction due to enhanced hydrophobic and hydrophilic segregation. In addition, when using the blended ionomer, the CLs form a more porous microstructure to help reduce the resistance of oxygen transport and contributes to lower mass transfer loss. This effect is proven in fuel cell operations at not a lower temperature (70 °C) and full humidification (100%) but at an elevated temperature (80 °C) and lower relative humidity (50 and 75%). Blended ionomer-based CLs with a higher water uptake and porous CL structure result in improved fuel cell performance with better mass transport than single ionomer-based CLs.

Schlagwörter

Stichwörter der Autor:innen

blended ionomercatalyst layerperfluorinated sulfonic acid ionomerpolymer electrolyte fuel cellproton conductivity

Autor:innen und Institutionen

  • Department of Green Chemical Engineering, College of Engineering, Sangmyung University, Cheonan 31066, Republic of Korea.
  • Department of Civil, Environmental and Biomedical Engineering, The Graduate School, Sangmyung University, Cheonan 31066, Republic of Korea.
  • Future Environment and Energy Research Institute, Sangmyung University, Cheonan 31066, Republic of Korea.

ORCID-Profile: Jong-Hyeok Park, Jin-Soo Park

Förderung

  • Sangmyung University

Zitieren

APA

Kim, B. S., Park, J. H., & Park, J. S. (2023). Effect of Blended Perfluorinated Sulfonic Acid Ionomer Binder on the Performance of Catalyst Layers in Polymer Electrolyte Membrane Fuel Cells. Membranes, 13(9), 794. https://doi.org/10.3390/membranes13090794

Vancouver

Kim BS, Park JH, Park JS. Effect of Blended Perfluorinated Sulfonic Acid Ionomer Binder on the Performance of Catalyst Layers in Polymer Electrolyte Membrane Fuel Cells. Membranes. 2023;13(9):794. doi:10.3390/membranes13090794

BibTeX
@article{Kim2023,
  author = {Kim, Beom-Seok and Park, Jong-Hyeok and Park, Jin-Soo},
  title = {Effect of Blended Perfluorinated Sulfonic Acid Ionomer Binder on the Performance of Catalyst Layers in Polymer Electrolyte Membrane Fuel Cells},
  journal = {Membranes},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {794},
  doi = {10.3390/membranes13090794}
}
Kostenlos starten →