EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wetting-Based Comparison of Ag, Carbon Black, and MoS2 Composite Membranes for Photothermal Membrane Distillation

Tarik Eljaddi iD, Corinne Cabassud iD

Membranes · 04.09.2023 · 13 (9) · 780

DOI: 10.3390/membranes13090780 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 04.09.2023. Verfasst von Tarik Eljaddi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Toulouse Biotechnology Institute, Université de Toulouse, CNRS, INRAE, INSA, 135 Avenue de Rangueil, CEDEX 04, 31077 Toulouse, France. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, National Research Agency (ANR) of France, 3rd ERANETMED joint call.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photothermal membrane distillation is a new-generation desalination process that can take advantage of the ability of specific materials to convert solar energy to heat at the membrane surface and thus to overcome temperature polarization. The development of appropriate photothermal membranes is challenging because many criteria need to be considered, including light to heat conversion, permeability and low wetting, and fouling, as well as cost. Based on our experience with wetting characterization, this study compares photothermal membranes prepared using different well-known or promising materials, i.e., silver nanoparticles (Ag NPs), carbon black, and molybdenum disulfide (MoS2), in terms of their structural properties, permeability, wettability, and wetting. Accordingly, membranes with different proportions of photothermal NPs are prepared and fully characterized in this study. Wetting is investigated using the detection of dissolved tracer intrusion (DDTI) method following membrane distillation operations with saline solutions. The advantages of MoS2 and carbon black-based photothermal membranes in comparison with polyvinylidene difluoride (PVDF) membranes include both a permeability increase and a less severe wetting mechanism, with lower wetting indicators in the short term. These materials are also much cheaper than Ag NPs, having higher permeabilities and presenting less severe wetting mechanisms.

Schlagwörter

Stichwörter der Autor:innen

AgMoS2carbon blackcomposite membranedesalinationphotothermal membrane distillationplasmonic particleswetting

Autor:innen und Institutionen

  • Toulouse Biotechnology Institute, Université de Toulouse, CNRS, INRAE, INSA, 135 Avenue de Rangueil, CEDEX 04, 31077 Toulouse, France.

ORCID-Profile: Tarik Eljaddi, Corinne Cabassud

Förderung

  • Agence Nationale de la Recherche
  • National Research Agency (ANR) of France
  • 3rd ERANETMED joint call

Zitieren

APA

Eljaddi, T., & Cabassud, C. (2023). Wetting-Based Comparison of Ag, Carbon Black, and MoS2 Composite Membranes for Photothermal Membrane Distillation. Membranes, 13(9), 780. https://doi.org/10.3390/membranes13090780

Vancouver

Eljaddi T, Cabassud C. Wetting-Based Comparison of Ag, Carbon Black, and MoS2 Composite Membranes for Photothermal Membrane Distillation. Membranes. 2023;13(9):780. doi:10.3390/membranes13090780

BibTeX
@article{Eljaddi2023,
  author = {Eljaddi, Tarik and Cabassud, Corinne},
  title = {Wetting-Based Comparison of Ag, Carbon Black, and MoS2 Composite Membranes for Photothermal Membrane Distillation},
  journal = {Membranes},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {780},
  doi = {10.3390/membranes13090780}
}
Kostenlos starten →