Investigating the Sulfonated Chitosan/Polyvinylidene Fluoride-Based Proton Exchange Membrane with fSiO2 as Filler in Microbial Fuel Cells
Membranes · 25.08.2023 · 13 (9) · 758
DOI: 10.3390/membranes13090758 ↗Kurz gefasst
Fachartikel in der Zeitschrift Membranes, online erschienen am 25.08.2023. Verfasst von Gowthami Palanisamy und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Yeungnam University, Gyeongsan 8541, Republic of Korea. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Research Center For Natural Products and Medical Materials (RCNM).
Abstract (Originalsprache)
Chitosan (CS), a promising potential biopolymer with exquisite biocompatibility, economic viability, hydrophilicity, and chemical modifications, has drawn interest as an alternative material for proton exchange membrane (PEM) fabrication. However, CS in its original form exhibited low proton conductivity and mechanical stability, restricting its usage in PEM development. In this work, chitosan was functionalized (sulfonic acid (-SO3H) groups)) to enhance proton conductivity. The sulfonated chitosan (sCS) was blended with polyvinylidene fluoride (PVDF) polymer, along with the incorporation of functionalized SiO2 (–OH groups), for fabricating chitosan-based composite proton exchange membranes to enhance microbial fuel cell (MFC) performances. The results show that adding functionalized inorganic fillers (fSiO2) into the membrane enhances the mechanical, thermal, and anti-biofouling behavior. From the results, the PVDF/sCS/fSiO2 composite membrane exhibited enhanced proton conductivity 1.0644 × 10−2 S cm−1 at room temperature and increased IEC and mechanical and chemical stability. Furthermore, this study presents a revolutionary way to generate environmentally friendly natural polymer-based membrane materials for developing PEM candidates for enhanced MFC performances in generating bioelectricity and wastewater treatment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Yeungnam University, Gyeongsan 8541, Republic of Korea.
ORCID-Profile: Gowthami Palanisamy, Ajmal P Muhammed, Sadhasivam Thangarasu, Tae Hwan Oh
Förderung
- National Research Foundation of Korea
- Research Center For Natural Products and Medical Materials (RCNM)
Zitieren
APA
Palanisamy, G., Muhammed, A. P., Thangarasu, S., & Oh, T. H. (2023). Investigating the Sulfonated Chitosan/Polyvinylidene Fluoride-Based Proton Exchange Membrane with fSiO2 as Filler in Microbial Fuel Cells. Membranes, 13(9), 758. https://doi.org/10.3390/membranes13090758
Vancouver
Palanisamy G, Muhammed AP, Thangarasu S, Oh TH. Investigating the Sulfonated Chitosan/Polyvinylidene Fluoride-Based Proton Exchange Membrane with fSiO2 as Filler in Microbial Fuel Cells. Membranes. 2023;13(9):758. doi:10.3390/membranes13090758
BibTeX
@article{Palanisamy2023,
author = {Palanisamy, Gowthami and Muhammed, Ajmal P and Thangarasu, Sadhasivam and Oh, Tae Hwan},
title = {Investigating the Sulfonated Chitosan/Polyvinylidene Fluoride-Based Proton Exchange Membrane with fSiO2 as Filler in Microbial Fuel Cells},
journal = {Membranes},
year = {2023},
volume = {13},
number = {9},
pages = {758},
doi = {10.3390/membranes13090758}
}
EUVIMED