EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Clean Energy Based Multigeneration System for Sustainable Cities: Thermodynamic, and Stability Analyses

Uzair Bhatti, Hamza Aamir, Khurram Kamal, Tahir Abdul Hussain Ratlamwala iD, Fahad Alqahtani iD, Mohammed Alkahtani iD, Emad Mohammad iD, Moath Alatefi

Membranes · 20.03.2023 · 13 (3) · 358

DOI: 10.3390/membranes13030358 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 20.03.2023. Verfasst von Uzair Bhatti und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Sciences, National University of Sciences and Technology, Islamabad 44000, Pakistan. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia, Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper concerns the development and analysis of multigeneration systems based on hybrid sources such as biomass and wind. Industry requires different types of sources to provide several outputs, so the goal of this research was to fulfill the industrial requirement with optimization. The multigeneration cycle supplies enough power to satiate energy demands, i.e., power, cooling, hydrogen, air conditioning, freshwater, hot water, and heating. For this, the multigeneration cycle was modeled in the Engineering Equation Solver (EES) and Simulink to obtain optimized results for the industry. Energy and exergy for the multigeneration cycle were determined to assess the performance of the cycle and to investigate the optimized results for the overall system. This study shows that for configuration selection and design, different thermodynamic, economic, and environmental aspects should be considered. Based on the results, the selection of the best location for this multigeneration system was made. Power output from the wind turbine was around 7 MW and from biogas 0.6 MW. The overall exergy efficiency of the multigeneration system was found to be 0.1401.

Schlagwörter

Stichwörter der Autor:innen

Simulinkhydrogenmultigenerationrenewable energyroot locusstability analysis

Autor:innen und Institutionen

  • Department of Engineering Sciences, National University of Sciences and Technology, Islamabad 44000, Pakistan.
  • Industrial Engineering Department, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia.
  • Electrical Engineering Department, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia.

ORCID-Profile: Tahir Abdul Hussain Ratlamwala, Fahad Alqahtani, Mohammed Alkahtani, Emad Mohammad

Förderung

  • Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia
  • Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia

Zitieren

APA

Bhatti, U., Aamir, H., Kamal, K., Ratlamwala, T. A. H., Alqahtani, F., Alkahtani, M., Mohammad, E., & Alatefi, M. (2023). Clean Energy Based Multigeneration System for Sustainable Cities: Thermodynamic, and Stability Analyses. Membranes, 13(3), 358. https://doi.org/10.3390/membranes13030358

Vancouver

Bhatti U, Aamir H, Kamal K, Ratlamwala TAH, Alqahtani F, Alkahtani M, et al. Clean Energy Based Multigeneration System for Sustainable Cities: Thermodynamic, and Stability Analyses. Membranes. 2023;13(3):358. doi:10.3390/membranes13030358

BibTeX
@article{Bhatti2023,
  author = {Bhatti, Uzair and Aamir, Hamza and Kamal, Khurram and Ratlamwala, Tahir Abdul Hussain and Alqahtani, Fahad and Alkahtani, Mohammed and Mohammad, Emad and Alatefi, Moath},
  title = {Clean Energy Based Multigeneration System for Sustainable Cities: Thermodynamic, and Stability Analyses},
  journal = {Membranes},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {358},
  doi = {10.3390/membranes13030358}
}
Kostenlos starten →