EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ag-CuO-Decorated Ceramic Membranes for Effective Treatment of Oily Wastewater

Amos Avornyo iD, Arumugham Thanigaivelan, Rambabu Krishnamoorthy iD, Shadi W Hassan, Fawzi Banat iD

Membranes · 01.02.2023 · 13 (2) · 176

DOI: 10.3390/membranes13020176 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Membranes, online erschienen am 01.02.2023. Verfasst von Amos Avornyo und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Khalifa University, Abu Dhabi 127788, United Arab Emirates. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although ultrafiltration is a reliable method for separating oily wastewater, the process is limited by problems of low flux and membrane fouling. In this study, for the first time, commercial TiO2/ZrO2 ceramic membranes modified with silver-functionalized copper oxide (Ag-CuO) nanoparticles are reported for the improved separation performance of emulsified oil. Ag-CuO nanoparticles were synthesized via hydrothermal technique and dip-coated onto commercial membranes at varying concentrations (0.1, 0.5, and 1.0 wt.%). The prepared membranes were further examined to understand the improvements in oil-water separation due to Ag-CuO coating. All modified ceramic membranes exhibited higher hydrophilicity and decreased porosity. Additionally, the permeate flux, oil rejection, and antifouling performance of the Ag-CuO-coated membranes were more significantly improved than the pristine commercial membrane. The 0.5 wt.% modified membrane exhibited a 30% higher water flux (303.63 L m−2 h−1) and better oil rejection efficiency (97.8%) for oil/water separation among the modified membranes. After several separation cycles, the 0.5 wt.% Ag-CuO-modified membranes showed a constant permeate flux with an excellent oil rejection of >95% compared with the unmodified membrane. Moreover, the corrosion resistance of the coated membrane against acid, alkali, actual seawater, and oily wastewater was remarkable. Thus, the Ag-CuO-modified ceramic membranes are promising for oil separation applications due to their high flux, enhanced oil rejection, better antifouling characteristics, and good stability.

Schlagwörter

Stichwörter der Autor:innen

TiO2/ZrO2ceramic membranesmembrane coatingnanocompositesoil/water separation

Autor:innen und Institutionen

  • Department of Chemical Engineering, Khalifa University, Abu Dhabi 127788, United Arab Emirates.
  • Center for Membranes and Advanced Water Technology (CMAT), Khalifa University of Science and Technology, Abu Dhabi 127788, United Arab Emirates.

ORCID-Profile: Amos Avornyo, Rambabu Krishnamoorthy, Fawzi Banat

Zitieren

APA

Avornyo, A., Thanigaivelan, A., Krishnamoorthy, R., Hassan, S. W., & Banat, F. (2023). Ag-CuO-Decorated Ceramic Membranes for Effective Treatment of Oily Wastewater. Membranes, 13(2), 176. https://doi.org/10.3390/membranes13020176

Vancouver

Avornyo A, Thanigaivelan A, Krishnamoorthy R, Hassan SW, Banat F. Ag-CuO-Decorated Ceramic Membranes for Effective Treatment of Oily Wastewater. Membranes. 2023;13(2):176. doi:10.3390/membranes13020176

BibTeX
@article{Avornyo2023,
  author = {Avornyo, Amos and Thanigaivelan, Arumugham and Krishnamoorthy, Rambabu and Hassan, Shadi W and Banat, Fawzi},
  title = {Ag-CuO-Decorated Ceramic Membranes for Effective Treatment of Oily Wastewater},
  journal = {Membranes},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {176},
  doi = {10.3390/membranes13020176}
}
Kostenlos starten →