EUVIMEDEUVIMED entdecken
Multizentrische StudieOpen Access · CC BY 4.0

Hemipelvectomy and 3D Custom-Made Prosthesis Implantation: Early Surgical, Radiographic, and Functional Results—A Multicentre Study

Grzegorz Guzik iD, Daniel Pyrka, Paweł Łęgosz, Piotr Szremski, Piotr Biega

Medicina · 13.05.2026 · 62 (5) · 951

DOI: 10.3390/medicina62050951 ↗

Kurz gefasst

Multizentrische Studie in der Zeitschrift Medicina, online erschienen am 13.05.2026. Verfasst von Grzegorz Guzik und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedic Oncology, Subcarpatian Oncology Centre, Dworska 77A, 38-420 Korczyna, Poland. Hauptthemen laut MEDLINE: Hemipelvectomy, Prosthesis Implantation, Prosthesis Design. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

There are still insufficient studies based on large patient cohorts that evaluate both functional and surgical outcomes after internal hemipelvectomy and 3D-printed endoprosthesis implantation. This study aimed to determine how the method of pelvic bone defect reconstruction determines early functional, surgical, and radiographic outcomes.

Methods

The aims of the study were achieved based on retrospective observations of 49 patients who underwent surgical treatment at several centres in Poland. All patients underwent internal hemipelvectomy and implantation of 3D-printed prostheses. Surgical parameters were assessed, including operative time, blood loss, and surgical complications (infections, implant loosening, dislocations), as well as bone osseointegration. Functional outcomes were assessed using the HHS and MSTS-93 scales, and pain intensity was measured using the VAS. Outcomes were stratified according to implant design and fixation method based on the West China Classification.

Results

The most commonly performed procedures were internal hemipelvectomies of Enneking Type I + II and II + III, with reconstructions most frequently classified as WChC-Aa (15%) and WChC-Bb (44%). Functional assessments revealed significant improvement across all patients. Both the HHS and MSTS-93 values demonstrated marked progress from preoperative averages of 44 (HHS) and 12 (MSTS-93) to 64, 70.2, and 76 (HHS) and 19, 20, and 20.2 (MSTS-93) after 6 weeks, 3 months, and 6 months, respectively. Correspondingly, pain intensity decreased from a mean preoperative VAS score of 8.5 to 4.4, 3.4, and 3.2 after surgery. Osseointegration occurred in 53%, 75%, and 83% of patients after 6 weeks, 3 months, and 6 months, respectively. Wound-healing complications were observed in 6 patients, while deep infection developed in 4 cases. In 3 patients, the implant was removed. Implant loosening was noted in imaging studies in 7 patients (14%) and 8 patients (16%) at 3 and 6 months postoperatively, respectively. Local tumour recurrence was observed in 6 cases.

Conclusions

The extent of pelvic tumour resection and the reconstruction method appear to influence surgical parameters, the risk of complications, and operative time. Functional outcomes measured using VAS, HHS, and MSTS-93 scales showed improvement following surgical treatment and tended to improve over time; however, these findings should be interpreted with caution given the relatively short follow-up period and the lack of assessment of minimal clinically important difference (MCID). The use of 3D-printed implants may facilitate precise pelvic reconstruction and enable early mobilization and rehabilitation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HemipelvectomyProsthesis ImplantationProsthesis DesignHumansFemaleRetrospective StudiesMiddle AgedMaleAdultAgedTreatment OutcomePelvic BonesRadiography

Stichwörter der Autor:innen

bone defectscustomized implantsendoprostheseshemipelvectomypelvic surgery

Autor:innen und Institutionen

  • Department of Orthopaedic Oncology, Subcarpatian Oncology Centre, Dworska 77A, 38-420 Korczyna, Poland.
  • Department of Trauma and Orthopaedic Surgery, Hospital in Krosno, 38-400 Krosno, Poland.
  • Orthopedics and Traumatology Clinic in Warsaw, Medical University of Warsaw, 02-091 Warsaw, Poland.
  • Trauma and Orthopaedic Department, District Hospital in Przemyśl, 37-700 Przemyśl, Poland.

ORCID-Profile: Grzegorz Guzik

Zitieren

APA

Guzik, G., Pyrka, D., Łęgosz, P., Szremski, P., & Biega, P. (2026). Hemipelvectomy and 3D Custom-Made Prosthesis Implantation: Early Surgical, Radiographic, and Functional Results—A Multicentre Study. Medicina, 62(5), 951. https://doi.org/10.3390/medicina62050951

Vancouver

Guzik G, Pyrka D, Łęgosz P, Szremski P, Biega P. Hemipelvectomy and 3D Custom-Made Prosthesis Implantation: Early Surgical, Radiographic, and Functional Results—A Multicentre Study. Medicina. 2026;62(5):951. doi:10.3390/medicina62050951

BibTeX
@article{Guzik2026,
  author = {Guzik, Grzegorz and Pyrka, Daniel and Łęgosz, Paweł and Szremski, Piotr and Biega, Piotr},
  title = {Hemipelvectomy and 3D Custom-Made Prosthesis Implantation: Early Surgical, Radiographic, and Functional Results—A Multicentre Study},
  journal = {Medicina},
  year = {2026},
  volume = {62},
  number = {5},
  pages = {951},
  doi = {10.3390/medicina62050951}
}
Kostenlos starten →