EUVIMEDEUVIMED entdecken
FallberichtOpen Access · CC BY 4.0

A New Full Digital Workflow for Fixed Prosthetic Rehabilitation of Full-Arch Edentulism Using the All-on-4 Concept

João Martins, João Rangel iD, Miguel de Araújo Nobre iD, Ana Ferro, Mariana Nunes, Ricardo Almeida, Carlos Moura Guedes

Medicina · 2024

DOI: 10.3390/medicina60050720 ↗

Kurz gefasst

Fallbericht in der Zeitschrift Medicina, 2024. Verfasst von João Martins und 6 weiteren Autor:innen. Beteiligte Einrichtung: Prosthodontic Department, Malo Clinic, Avenida dos Combatentes, 43, Level 10, 1600-042 Lisbon, Portugal. Hauptthemen laut MEDLINE: Workflow. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

(1)

Background

Recent digital workflows are being developed for full-arch rehabilitations supported by implants with immediate function. The purpose of this case series is to describe a new digital workflow for the All-on-4 concept. (2)

Methods

The patients were rehabilitated using the All-on-4 concept with a digital workflow including computerized tomography scanning, intra-oral scanning, and CAD-CAM production of the temporary prosthesis, with the 3D printing of stackable guides (base guide, implant guide, and prosthetic guide). The passive fit of the prostheses and the time to perform the rehabilitations were evaluated. (3)

Results

The digital workflow allowed for predictable bone reduction, the insertion of implants with immediate function, and the connection of an implant-supported prosthesis with immediate loading. The time registered to perform the full-arch rehabilitations (implant insertion, abutment connection, prosthesis connection) was below 2 hours and 30 min. No passive fit issues were noted. (4) Conclusions: within the limitation of this case series, the digital workflow applied to the All-on-4 concept using stackable base-, implant-, and prosthetic guides constitutes a potential alternative with decreased time for the procedure without prejudice of the outcome.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

WorkflowHumansFemaleMaleMiddle AgedComputer-Aided DesignAgedDental Prosthesis, Implant-SupportedPrinting, Three-DimensionalTomography, X-Ray ComputedMouth, Edentulous

Stichwörter der Autor:innen

CAD-CAMdental implantsdental prosthesis designdiagnostic techniques and proceduresedentulous jawimmediate loadingmaxilla

Autor:innen und Institutionen

  • Prosthodontic Department, Malo Clinic, Avenida dos Combatentes, 43, Level 10, 1600-042 Lisbon, Portugal.
  • Research, Development and Education Department, Malo Clinic, Avenida dos Combatentes, 43, Level 11, 1600-042 Lisbon, Portugal.
  • Oral Surgery Department, Malo Clinic, Avenida dos Combatentes, 43, Level 9, 1600-042 Lisbon, Portugal.

ORCID-Profile: João Rangel, Miguel de Araújo Nobre

Zitieren

APA

Martins, J., Rangel, J., de Araújo Nobre, M., Ferro, A., Nunes, M., Almeida, R., & Moura Guedes, C. (2024). A New Full Digital Workflow for Fixed Prosthetic Rehabilitation of Full-Arch Edentulism Using the All-on-4 Concept. Medicina. https://doi.org/10.3390/medicina60050720

Vancouver

Martins J, Rangel J, de Araújo Nobre M, Ferro A, Nunes M, Almeida R, et al. A New Full Digital Workflow for Fixed Prosthetic Rehabilitation of Full-Arch Edentulism Using the All-on-4 Concept. Medicina. 2024. doi:10.3390/medicina60050720

BibTeX
@article{Martins2024,
  author = {Martins, João and Rangel, João and de Araújo Nobre, Miguel and Ferro, Ana and Nunes, Mariana and Almeida, Ricardo and Moura Guedes, Carlos},
  title = {A New Full Digital Workflow for Fixed Prosthetic Rehabilitation of Full-Arch Edentulism Using the All-on-4 Concept},
  journal = {Medicina},
  year = {2024},
  doi = {10.3390/medicina60050720}
}
Kostenlos starten →