EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Method for 6-DOF Motion Measurement of Marine Floating Structures Based on Monocular Vision and Feature Point Tracking

Chunyu Jiang, Hongda Shi, Chenyu Zhao, Qian Deng, Jian Li, Huihui Sun

Mathematics · 27.07.2026 · 14 (15) · 2697

DOI: 10.3390/math14152697 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mathematics, online erschienen am 27.07.2026. Verfasst von Chunyu Jiang und 5 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Laoshan Laboratory, Key R&D Program (Soft Science Project) of Shandong Province, China, Shandong Institute of Chinese Engineering S&T Strategy for Development.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate measurement of the 6-DOF motion responses of marine floating structures is essential for structural safety assessment and operational decision-making. To address the critical issues of integration drift in inertial navigation systems, susceptibility of GNSS to sea-surface multipath effects, and deployment complexity of binocular vision systems, this paper proposed a 6-DOF motion measurement method for floating structures based on monocular vision and natural feature point tracking. This method eliminates the reliance on artificial cooperative targets and auxiliary sensors, instead utilizing the inherent surface textures of the floating structures as feature sources. Stable feature point tracking is achieved through multi-strategy cascaded detection and the pyramidal KLT optical flow algorithm. RANSAC geometric consistency verification is introduced to eliminate outlier matches, retaining only identical physical points between two consecutive frames for motion estimation. In-plane translations and RZ angle are extracted from the similarity transformation, while RX and RY angles are estimated using principal component analysis of the covariance matrix of the feature point set. The depth-direction displacement is linearly mapped from variations in the scale factor. Subsequently, two series of physical model tests under different conditions were conducted to validate the measurement accuracy and robustness of the proposed method on different floating structures. The results demonstrate that the proposed method can accurately capture the motion attitudes of floating structures, maintaining a consistently high inlier ratio exceeding 80% in regular waves and averaging 85.2% in irregular waves, with a reprojection error of less than 0.05 pixels. The NRMSE for the primary motion directions are all below 10%, and the dominant frequency errors are essentially zero. It offers advantages such as low cost, easy deployment, and strong robustness, thereby providing valuable technical support for field monitoring of marine floating structures.

Förderung

  • Laoshan Laboratory
  • Key R&D Program (Soft Science Project) of Shandong Province, China
  • Shandong Institute of Chinese Engineering S&T Strategy for Development

Zitieren

APA

Jiang, C., Shi, H., Zhao, C., Deng, Q., Li, J., & Sun, H. (2026). A Method for 6-DOF Motion Measurement of Marine Floating Structures Based on Monocular Vision and Feature Point Tracking. Mathematics, 14(15), 2697. https://doi.org/10.3390/math14152697

Vancouver

Jiang C, Shi H, Zhao C, Deng Q, Li J, Sun H. A Method for 6-DOF Motion Measurement of Marine Floating Structures Based on Monocular Vision and Feature Point Tracking. Mathematics. 2026;14(15):2697. doi:10.3390/math14152697

BibTeX
@article{Jiang2026,
  author = {Jiang, Chunyu and Shi, Hongda and Zhao, Chenyu and Deng, Qian and Li, Jian and Sun, Huihui},
  title = {A Method for 6-DOF Motion Measurement of Marine Floating Structures Based on Monocular Vision and Feature Point Tracking},
  journal = {Mathematics},
  year = {2026},
  volume = {14},
  number = {15},
  pages = {2697},
  doi = {10.3390/math14152697}
}
Kostenlos starten →