EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mathematical Modeling, Sensitivity Analysis, and Comparative Evaluation of Height Systems in Engineering, Geodetic, and Cartographic Applications: A Romania-Oriented Computational Study

Gabriel Bădescu, Mihail Susinski, Cristian Vasile, Petre Săvescu, Emilia Constantinescu, Gabriel Tănasie, Nicolae Dima, Larisa-Ofelia Filip, Adrian Savu, Caius Didulescu

Mathematics · 16.07.2026 · 14 (14) · 2574

DOI: 10.3390/math14142574 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mathematics, online erschienen am 16.07.2026. Verfasst von Gabriel Bădescu und 9 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Height systems form a mathematical interface between physical geodesy, engineering surveying, and digital cartography. Although satellite positioning efficiently provides ellipsoidal heights, practical infrastructure, mapping, hydrological, and monitoring tasks require gravity-related heights that are compatible with national vertical datums. This paper develops a denominator-based framework in which dynamic, orthometric, and normal heights are interpreted as metric realizations of a common geopotential number. Starting from the line-integral definition of geopotential, the principal height formulae are derived; first-order sensitivities to geoid undulation, height anomaly, and mean gravity are established; and uncertainty propagation is analyzed. A Romania-oriented computational experiment, explicitly defined as a representative model-behavior study rather than an official national adjustment, uses lowland, plateau, and mountain-influenced settings consistent with the Constanta and Black Sea 1975 normal-height context. The results show that modeled normal-orthometric separations remain below 3 mm in representative low-relief locations but increase to 17.1 mm in Suceava, 29.5 mm in Cluj-Napoca, and 85.6 mm in the mountain-influenced Brasov case. The dynamic-normal differences remain small at low elevations but become systematic where the normal-gravity denominator departs from the selected reference value. The Monte Carlo experiment indicates standard uncertainties of approximately 4.2–4.4 cm for normal heights when a 1.5 cm ellipsoidal-height uncertainty and a 4.0 cm quasi-geoid uncertainty are assumed. A single-point covariance example gives 31.7 mm for normal-height conversion and 36.9 mm for orthometric-height conversion under the stated correlation assumptions. The transformation-surface comparison further shows that a quadratic local model reduces leave-one-out cross-validation error from 16.73 mm to 9.95 mm relative to a planar model in the synthetic Romania-oriented scenario. The study concludes that the height-system label must be treated as part of the mathematical model and metadata, and it proposes a geopotential-centered computational pathway for survey adjustment, uncertainty control, and metadata-safe geospatial export.

Zitieren

APA

Bădescu, G., Susinski, M., Vasile, C., Săvescu, P., Constantinescu, E., Tănasie, G., Dima, N., Filip, L., Savu, A., & Didulescu, C. (2026). Mathematical Modeling, Sensitivity Analysis, and Comparative Evaluation of Height Systems in Engineering, Geodetic, and Cartographic Applications: A Romania-Oriented Computational Study. Mathematics, 14(14), 2574. https://doi.org/10.3390/math14142574

Vancouver

Bădescu G, Susinski M, Vasile C, Săvescu P, Constantinescu E, Tănasie G, et al. Mathematical Modeling, Sensitivity Analysis, and Comparative Evaluation of Height Systems in Engineering, Geodetic, and Cartographic Applications: A Romania-Oriented Computational Study. Mathematics. 2026;14(14):2574. doi:10.3390/math14142574

BibTeX
@article{Bdescu2026,
  author = {Bădescu, Gabriel and Susinski, Mihail and Vasile, Cristian and Săvescu, Petre and Constantinescu, Emilia and Tănasie, Gabriel and Dima, Nicolae and Filip, Larisa-Ofelia and Savu, Adrian and Didulescu, Caius},
  title = {Mathematical Modeling, Sensitivity Analysis, and Comparative Evaluation of Height Systems in Engineering, Geodetic, and Cartographic Applications: A Romania-Oriented Computational Study},
  journal = {Mathematics},
  year = {2026},
  volume = {14},
  number = {14},
  pages = {2574},
  doi = {10.3390/math14142574}
}
Kostenlos starten →