A DDES-Driven Framework for Hydraulic Radial-Force Reduction in Centrifugal Pumps via Sensitivity Analysis and Surrogate-Based Optimization
Mathematics · 16.07.2026 · 14 (14) · 2569
DOI: 10.3390/math14142569 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mathematics, online erschienen am 16.07.2026. Verfasst von Hehui Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Hunan Province, China.
Abstract (Originalsprache)
Hydraulic radial force from rotor–stator interaction causes pump vibration and bearing wear. To regulate this, this study proposes a low-vibration impeller design framework combining delayed detached-eddy simulation (DDES), Spearman correlation, sensitivity analysis, and multi-objective NSGA-II optimization, while explicitly treating hydraulic radial force as a primary design objective under an unchanged volute configuration, and is supported by multi-condition experiments. Four key parameters are defined: blade wrap angle (φ), governing passage diffusion; outlet blade angle (β), determining exit fluid trajectories; tangential cutting diameter (Dt), controlling shroud radius; and oblique cutting angle (ζ), adjusting near-hub boundaries. Sensitivity analysis indicates that Dt dominantly controls head and force regulation (42.3% head contribution), while β governs efficiency. Multi-objective optimization identifies an optimal low-vibration configuration (φ = 126°, β = 36°, Dt = 136 mm). Under rated conditions, this design curtails mean radial force by 26.6% (from 9.10 to 6.68 N) and blade-passing-frequency amplitude by 11.9%, while efficiency at 0.4Qd increases by 6.75 percentage points. Flow-field analysis demonstrates that force reduction stems from improved circumferential pressure uniformity, jet-wake suppression, and weakened trailing-edge vortical transport near the volute tongue. These results highlight the framework’s design innovation and practical value for low-vibration optimization of centrifugal pumps and related turbomachinery.
Förderung
- Natural Science Foundation of Hunan Province, China
Zitieren
APA
Zhang, H., Liu, T., Li, K., Tang, R., Hu, J., Zuo, Q., & Jiang, L. (2026). A DDES-Driven Framework for Hydraulic Radial-Force Reduction in Centrifugal Pumps via Sensitivity Analysis and Surrogate-Based Optimization. Mathematics, 14(14), 2569. https://doi.org/10.3390/math14142569
Vancouver
Zhang H, Liu T, Li K, Tang R, Hu J, Zuo Q, et al. A DDES-Driven Framework for Hydraulic Radial-Force Reduction in Centrifugal Pumps via Sensitivity Analysis and Surrogate-Based Optimization. Mathematics. 2026;14(14):2569. doi:10.3390/math14142569
BibTeX
@article{Zhang2026,
author = {Zhang, Hehui and Liu, Ting and Li, Kang and Tang, Rui and Hu, Jianxin and Zuo, Qingsong and Jiang, Liangxing},
title = {A DDES-Driven Framework for Hydraulic Radial-Force Reduction in Centrifugal Pumps via Sensitivity Analysis and Surrogate-Based Optimization},
journal = {Mathematics},
year = {2026},
volume = {14},
number = {14},
pages = {2569},
doi = {10.3390/math14142569}
}
EUVIMED