Configuration Design and Kinematic Analysis of RUPU/2UPU Reconfigurable Parallel Mechanism
Mathematics · 03.04.2026 · 14 (7) · 1205
DOI: 10.3390/math14071205 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mathematics, online erschienen am 03.04.2026. Verfasst von Shuwei Qu und 7 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanxi Provincial Education Science 14th Five-Year Plan Project, The Central Government-Guided Local Development Fund Project, The Basic Research Program of Shanxi Province.
Abstract (Originalsprache)
The configuration synthesis and kinematic analysis of reconfigurable parallel mechanisms are performed for two motion modes: three-translation (3T) and three-translation-one-rotation (3T1R). Firstly, the degrees of freedom and constraint conditions of the moving platform and the limbs of the mechanism are analyzed. The limb configurations satisfying the degrees of freedom are synthesized by using the equivalent motion screw method, and the RUPU/2UPU reconfigurable parallel mechanism is synthesized by reasonably arranging the limbs. The degrees of freedom and motion continuity of the mechanism are analyzed by using the geometric constraint method based on screw theory. It has been proved that the mechanism can switch motion modes via the revolute joint R. The inverse position solution and workspace of the mechanism are analyzed, and its full Jacobian matrix is established. Based on this matrix, the reconfigurability and singularity of the mechanism were analyzed. At the same time, the dexterity of the mechanism is evaluated based on the velocity Jacobian matrix and the actuation Jacobian matrix. The results of the two methods are consistent. Finally, the mechanism’s degrees of freedom, motion continuity, and reconfigurable characteristics are verified through virtual simulation experiments. The experimental results are consistent with the theoretical analysis.
Förderung
- Shanxi Provincial Education Science 14th Five-Year Plan Project
- The Central Government-Guided Local Development Fund Project
- The Basic Research Program of Shanxi Province
- The National Key Laboratory of CAD &CG, Zhejiang University, China
Zitieren
APA
Qu, S., Wang, H., Feng, S., Tian, X., Qian, Z., Yao, W., Li, C., & Gao, S. (2026). Configuration Design and Kinematic Analysis of RUPU/2UPU Reconfigurable Parallel Mechanism. Mathematics, 14(7), 1205. https://doi.org/10.3390/math14071205
Vancouver
Qu S, Wang H, Feng S, Tian X, Qian Z, Yao W, et al. Configuration Design and Kinematic Analysis of RUPU/2UPU Reconfigurable Parallel Mechanism. Mathematics. 2026;14(7):1205. doi:10.3390/math14071205
BibTeX
@article{Qu2026,
author = {Qu, Shuwei and Wang, Hongfu and Feng, Shengquan and Tian, Xiaoguang and Qian, Zhike and Yao, Wei and Li, Chaochao and Gao, Shenlin},
title = {Configuration Design and Kinematic Analysis of RUPU/2UPU Reconfigurable Parallel Mechanism},
journal = {Mathematics},
year = {2026},
volume = {14},
number = {7},
pages = {1205},
doi = {10.3390/math14071205}
}
EUVIMED