EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic Electrical–Magnetic–Thermal Response of Fe Soft Magnetic Composites Enabled by Thiol-Functionalised Silicon Nitride Nanosheet Interfacial Engineering

Shuang Chen, Zhongqiu Fu, Kang Wang, Gongyu Ji, Cheng Liu

Magnetochemistry · 18.08.2026 · 12 (8) · 91

DOI: 10.3390/magnetochemistry12080091 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Magnetochemistry, online erschienen am 18.08.2026. Verfasst von Shuang Chen und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Province major industrial innovation plan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pure Fe soft magnetic composites (SMCs) hold a prominent position in cost-sensitive 10–100 kHz medium-to-low-frequency power devices owing to their low raw-material expenditure and high saturation magnetisation. Nevertheless, the inherently poor interparticle electrical resistivity permits the formation of contiguous conduction paths under alternating magnetic fields, giving rise to marked eddy-current dissipation and localised thermal accumulation. To surmount this limitation, the present work introduces γ-mercaptopropyltriethoxysilane (KH580)-functionalised silicon nitride (Si3N4) nanosheets as a multifunctional interfacial regulating layer that simultaneously establishes an electrically insulating barrier and a thermally conductive network on the surface of Fe particles. The structural integrity, surface chemical speciation and deposition behaviour of Si3N4-s nanosheets on Fe particles were systematically examined, and correlations among lamellar coverage completeness, interfacial bonding robustness and the coupled electrical–magnetic–thermal response were elucidated. The findings reveal that KH580 silanisation introduces a surface functional layer while preserving the parent α-Si3N4 crystal structure, and XPS analysis suggests possible local N–Fe and Fe–S interfacial interactions between Si3N4-s and the Fe surface. At a loading of 4 wt.% Si3N4-s, a comparatively continuous and uniform lamellar coating develops on the Fe particle surfaces. The corresponding Fe/Si3N4 SMCs exhibit the highest volume resistivity and a peak thermal conductivity of approximately 12.1 W·m−1·K−1, while maintaining a core loss of approximately 600.2 kW·m−3 at 50 mT and 100 kHz. These results indicate that the 4 wt.% specimen provides the most favourable overall balance among electrical insulation, magnetic response, core-loss suppression and thermal transport within the investigated composition range, furnishing a functionalised lamellar interfacial engineering strategy for performance advancement of low-cost Fe-based SMCs.

Förderung

  • Anhui Province major industrial innovation plan

Zitieren

APA

Chen, S., Fu, Z., Wang, K., Ji, G., & Liu, C. (2026). Synergistic Electrical–Magnetic–Thermal Response of Fe Soft Magnetic Composites Enabled by Thiol-Functionalised Silicon Nitride Nanosheet Interfacial Engineering. Magnetochemistry, 12(8), 91. https://doi.org/10.3390/magnetochemistry12080091

Vancouver

Chen S, Fu Z, Wang K, Ji G, Liu C. Synergistic Electrical–Magnetic–Thermal Response of Fe Soft Magnetic Composites Enabled by Thiol-Functionalised Silicon Nitride Nanosheet Interfacial Engineering. Magnetochemistry. 2026;12(8):91. doi:10.3390/magnetochemistry12080091

BibTeX
@article{Chen2026,
  author = {Chen, Shuang and Fu, Zhongqiu and Wang, Kang and Ji, Gongyu and Liu, Cheng},
  title = {Synergistic Electrical–Magnetic–Thermal Response of Fe Soft Magnetic Composites Enabled by Thiol-Functionalised Silicon Nitride Nanosheet Interfacial Engineering},
  journal = {Magnetochemistry},
  year = {2026},
  volume = {12},
  number = {8},
  pages = {91},
  doi = {10.3390/magnetochemistry12080091}
}
Kostenlos starten →