EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structural Modification and Electromagnetic Response of Ball-Milled Nd-Fe-C Alloys

Ziqiang Qiao, Juan Liu, Zhenzhong Wang

Magnetochemistry · 01.07.2026 · 12 (7) · 72

DOI: 10.3390/magnetochemistry12070072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Magnetochemistry, online erschienen am 01.07.2026. Verfasst von Ziqiang Qiao und 2 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan Association of Higher Education, Guangxi Key Laboratory of Information Materials.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the rapid development of communication technologies, electromagnetic pollution has become increasingly serious, driving the urgent demand for high-performance low-frequency microwave absorbers. This work focuses on Nd-Fe-C powders prepared by high-energy ball milling, aiming to explore low-cost, mass-producible absorbing materials with excellent low-frequency microwave absorption performance. The Nd10.2Fe84.6C5.2 alloy was synthesized via arc melting, and its powders were subsequently fabricated by high-energy ball milling for different milling durations. X-ray diffraction, scanning electron microscopy, and vector network analysis were employed to investigate the effect of high-energy ball milling on the microwave absorption properties of the Nd10.2Fe84.6C5.2 alloy. As the ball milling time increased, the particle size decreased, and the minimum reflection loss shifted to a lower frequency. Additionally, increasing the thickness of the absorbing coating also moved the minimum reflection loss toward the low-frequency region. The Nd10.2Fe84.6C5.2 alloy after 12 h of ball milling had good performance in the C (4.0–8.0 GHz) band when the coating thickness was in the range from 1.4 to 2.2 mm. A minimum reflection loss of −19.2 dB was achieved at 5.2 GHz, and the effective absorption bandwidth (RL < −10 dB, corresponding to a microwave absorption efficiency of 90%) reached 1.8 GHz at a matching thickness of 2.2 mm.

Förderung

  • Henan Association of Higher Education
  • Guangxi Key Laboratory of Information Materials

Zitieren

APA

Qiao, Z., Liu, J., & Wang, Z. (2026). Structural Modification and Electromagnetic Response of Ball-Milled Nd-Fe-C Alloys. Magnetochemistry, 12(7), 72. https://doi.org/10.3390/magnetochemistry12070072

Vancouver

Qiao Z, Liu J, Wang Z. Structural Modification and Electromagnetic Response of Ball-Milled Nd-Fe-C Alloys. Magnetochemistry. 2026;12(7):72. doi:10.3390/magnetochemistry12070072

BibTeX
@article{Qiao2026,
  author = {Qiao, Ziqiang and Liu, Juan and Wang, Zhenzhong},
  title = {Structural Modification and Electromagnetic Response of Ball-Milled Nd-Fe-C Alloys},
  journal = {Magnetochemistry},
  year = {2026},
  volume = {12},
  number = {7},
  pages = {72},
  doi = {10.3390/magnetochemistry12070072}
}
Kostenlos starten →