EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailoring Microstructure Orientation and Magnetic Properties in AlNiCo Permanent Magnets by Controlled Withdrawal Rate in High-Rate Solidification

Qilong Wu, Zhuo Sun, Anjian Pan, Huidong Qian, Yixing Li, Jinkui Fan, Jiantao Feng, Lizhong Zhao, Zhongwu Liu, Xuefeng Zhang

Magnetochemistry · 02.04.2026 · 12 (4) · 43

DOI: 10.3390/magnetochemistry12040043 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Magnetochemistry, online erschienen am 02.04.2026. Verfasst von Qilong Wu und 9 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Zhejiang Province, National Natural Science Foundation of China, Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Enhancing grain orientation along the crystal axis in AlNiCo alloys is crucial for developing high-performance permanent magnets. Traditional directional solidification, known as the “cold plate-hot mold” method, is constrained by a low thermal gradient, leading to inadequate microstructural uniformity and crystallographic alignment, which impedes the optimization of magnetic properties. In this study, we employed a high-speed solidification process with an enhanced cooling gradient to fabricate AlNiCo magnets at various withdrawal rates. The variation in drawing rate influenced grain orientation within the alloy, thereby altering the degree of alignment of the ferromagnetic α1 phase following subsequent heat treatment, which ultimately affected the magnetic properties. The optimal magnetic performance was attained at a withdrawal rate of 50 μm/s, where the sample exhibited the most favorable oriented microstructure, with a remanence (Br) of 10.62 kGs, intrinsic coercivity (Hcj) of 1.794 kOe, and a maximum energy product (BH)max of 10.93 MGOe. Moreover, magnets at different positions exhibit excellent consistency in magnetic properties, enhancing the material utilization efficiency. This research provides valuable process parameters and a foundational basis for developing high-performance AlNiCo alloys.

Förderung

  • Key Research and Development Program of Zhejiang Province
  • National Natural Science Foundation of China
  • Key Research and Development Program of China
  • Natural Science Foundation of Zhejiang Province of China

Zitieren

APA

Wu, Q., Sun, Z., Pan, A., Qian, H., Li, Y., Fan, J., Feng, J., Zhao, L., Liu, Z., & Zhang, X. (2026). Tailoring Microstructure Orientation and Magnetic Properties in AlNiCo Permanent Magnets by Controlled Withdrawal Rate in High-Rate Solidification. Magnetochemistry, 12(4), 43. https://doi.org/10.3390/magnetochemistry12040043

Vancouver

Wu Q, Sun Z, Pan A, Qian H, Li Y, Fan J, et al. Tailoring Microstructure Orientation and Magnetic Properties in AlNiCo Permanent Magnets by Controlled Withdrawal Rate in High-Rate Solidification. Magnetochemistry. 2026;12(4):43. doi:10.3390/magnetochemistry12040043

BibTeX
@article{Wu2026,
  author = {Wu, Qilong and Sun, Zhuo and Pan, Anjian and Qian, Huidong and Li, Yixing and Fan, Jinkui and Feng, Jiantao and Zhao, Lizhong and Liu, Zhongwu and Zhang, Xuefeng},
  title = {Tailoring Microstructure Orientation and Magnetic Properties in AlNiCo Permanent Magnets by Controlled Withdrawal Rate in High-Rate Solidification},
  journal = {Magnetochemistry},
  year = {2026},
  volume = {12},
  number = {4},
  pages = {43},
  doi = {10.3390/magnetochemistry12040043}
}
Kostenlos starten →