EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simple One-Pot Strategy for Viscosity Reduction in Itaconic Acid-Based UPRs via End-Group Modification

Olga Pantić, Pavle Spasojević, Vesna Panić, Maja Marković, Katarina Antić, Milica Spasojević Savković, Sanja Savić

Macromol · 13.11.2026 · 6 (4) · 111

DOI: 10.3390/macromol6040111 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromol, online erschienen am 13.11.2026. Verfasst von Olga Pantić und 6 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Fund of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improving the processability of bio-based unsaturated polyester resins without compromising their performance remains a key challenge for their broader industrial adoption. This study investigates how post-polymerization modification reactions influence their molecular structure, intermolecular interactions and rheological behavior. A solvent-free, one-pot post-polymerization modification reaction using dimethyl itaconate was developed to modify the prepolymers directly after synthesis, without any additional purification steps. Acetylation served as a reference post-polymerization modification reaction. Four prepolymers with varying contents of hydroxyl groups in excess (10–40 mol.%) were prepared and then modified. Both approaches resulted in substantial reductions in viscosity up to 71% for end-capping with dimethyl itaconate and up to 61% for acetylation (relative to the corresponding non-modified prepolymers), markedly enhancing processability. However, mechanical properties were sensitive to the post-polymerization modification reactions: while acetylation led to a general decrease across all measured mechanical properties, end-capping resulted in retained or increased tensile modulus despite the reduction in tensile strength, highlighting the trade-off between flow behavior and structural integrity. This study demonstrates that targeted end-group modification can effectively tune resin processability, providing insight for the design of sustainable resin systems.

Förderung

  • Science Fund of the Republic of Serbia

Zitieren

APA

Pantić, O., Spasojević, P., Panić, V., Marković, M., Antić, K., Savković, M. S., & Savić, S. (2026). Simple One-Pot Strategy for Viscosity Reduction in Itaconic Acid-Based UPRs via End-Group Modification. Macromol, 6(4), 111. https://doi.org/10.3390/macromol6040111

Vancouver

Pantić O, Spasojević P, Panić V, Marković M, Antić K, Savković MS, et al. Simple One-Pot Strategy for Viscosity Reduction in Itaconic Acid-Based UPRs via End-Group Modification. Macromol. 2026;6(4):111. doi:10.3390/macromol6040111

BibTeX
@article{Panti2026,
  author = {Pantić, Olga and Spasojević, Pavle and Panić, Vesna and Marković, Maja and Antić, Katarina and Savković, Milica Spasojević and Savić, Sanja},
  title = {Simple One-Pot Strategy for Viscosity Reduction in Itaconic Acid-Based UPRs via End-Group Modification},
  journal = {Macromol},
  year = {2026},
  volume = {6},
  number = {4},
  pages = {111},
  doi = {10.3390/macromol6040111}
}
Kostenlos starten →