EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A High-Fidelity Time-Domain Model of Plunge Centerless Grinding with Exact Wheel–Workpiece Intersection, Contact Compliance and Modal Machine Dynamics

Marco Leonesio, Giacomo Bianchi

Machines · 19.11.2026 · 14 (11) · 1383

DOI: 10.3390/machines14111383 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 19.11.2026. Verfasst von Marco Leonesio und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Workpiece roundness in plunge centerless grinding results from the interplay between the self-centering geometry of the work-rest blade and regulating wheel, the grinding force, the wheel–workpiece contact compliance and the machine structural dynamics. This paper presents a high-fidelity (HiFi) time-domain model that describes these phenomena with a level of detail suitable for process digital twins. The workpiece is represented as a radial z-buffer, and material removal is computed from the exact geometric intersection between each z-buffer ray and the grinding wheel, computed analytically by the law of sines. The normal grinding force combines a volumetric (chip-formation) and an edge (rubbing) component, while a local contact stiffness reduces the actual depth of cut with respect to the nominal interference. The relative wheel–workpiece dynamics are described by a modal model with an arbitrary number of modes, integrated with an implicit trapezoidal (Newmark average-acceleration) scheme whose step is locked to the angular resolution of the z-buffer. At every step, the nonlinear equilibrium among geometry, force and structural deflection is solved numerically. The model has been implemented in an open-source Python package and validated against 267 plunge-grinding tests performed on an industrial machine, starting from the measured initial profiles. The analysis of the measured profiles revealed a systematic imprint of the grinding wheel rotation, which was included in the model as a wheel run-out term. With this term, the predicted dominant lobe order matched the measured one in 64% of the tests with a dominant harmonic amplitude above 1 µm, and the simulated roundness correlated with the measured one (r=0.64, mean absolute error 1.0 μm), while the amplitude of the dominant lobes was generally underestimated. The scatter between repeated tests is of the same order as the model error, and a sensitivity analysis shows that, among the model parameters, only the wheel run-out significantly affects the lobe amplitude. Limitations and possible extensions of the model are discussed.

Zitieren

APA

Leonesio, M., & Bianchi, G. (2026). A High-Fidelity Time-Domain Model of Plunge Centerless Grinding with Exact Wheel–Workpiece Intersection, Contact Compliance and Modal Machine Dynamics. Machines, 14(11), 1383. https://doi.org/10.3390/machines14111383

Vancouver

Leonesio M, Bianchi G. A High-Fidelity Time-Domain Model of Plunge Centerless Grinding with Exact Wheel–Workpiece Intersection, Contact Compliance and Modal Machine Dynamics. Machines. 2026;14(11):1383. doi:10.3390/machines14111383

BibTeX
@article{Leonesio2026,
  author = {Leonesio, Marco and Bianchi, Giacomo},
  title = {A High-Fidelity Time-Domain Model of Plunge Centerless Grinding with Exact Wheel–Workpiece Intersection, Contact Compliance and Modal Machine Dynamics},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {1383},
  doi = {10.3390/machines14111383}
}
Kostenlos starten →