EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Modeling and Hybrid Manufacturing of Heat Exchangers: Design Considerations, Challenges and Opportunities

Georgia Thomadaki, Anastasios Chatzikonstantinou, Nikolaos E. Karkalos, Agathoklis A. Krimpenis

Machines · 17.11.2026 · 14 (11) · 1362

DOI: 10.3390/machines14111362 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 17.11.2026. Verfasst von Georgia Thomadaki und 3 weiteren Autor:innen. Die Arbeit nennt 156 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon Europe.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heat Exchangers (HXs) are critical components in aerospace, automotive, energy, and thermal management systems, where increasing demands for compactness, lightweight structures, and enhanced thermal efficiency are driving the development of advanced manufacturing approaches. Conventional manufacturing methods are limited in their ability to fabricate complex internal geometries, topology-optimized flow paths, and multi-material architectures required for next-generation HX designs. Additive manufacturing (AM) methods, such as Directed Energy Deposition (DED) and Powder Bed Fusion (PBF), offer significant geometric freedom and material efficiency. However, limitations related to surface roughness, dimensional accuracy, residual stress, and post-processing remain major barriers to industrial adoption. Hybrid Manufacturing (HM), which integrates additive and subtractive processes within a unified platform, has emerged as a promising solution by combining the design flexibility of AM with the precision and surface quality of conventional machining. This review examines the current state of HM technologies for advanced thermal management applications, the potential of their use for HXs, the roles of Triply Periodic Minimal Surface (TPMS) architectures and Functionally Graded Materials (FGMs), and how these can enhance the thermal performance of HXs. The findings from this review, mainly based on existing results from various heat system components, indicate that HM has the potential to improve the manufacturability and performance of complex HXs by enabling near-net-shape fabrication, high-quality surface finishing, and material tailoring within a single workflow.

Förderung

  • Horizon Europe

Zitieren

APA

Thomadaki, G., Chatzikonstantinou, A., Karkalos, N. E., & Krimpenis, A. A. (2026). Advanced Modeling and Hybrid Manufacturing of Heat Exchangers: Design Considerations, Challenges and Opportunities. Machines, 14(11), 1362. https://doi.org/10.3390/machines14111362

Vancouver

Thomadaki G, Chatzikonstantinou A, Karkalos NE, Krimpenis AA. Advanced Modeling and Hybrid Manufacturing of Heat Exchangers: Design Considerations, Challenges and Opportunities. Machines. 2026;14(11):1362. doi:10.3390/machines14111362

BibTeX
@article{Thomadaki2026,
  author = {Thomadaki, Georgia and Chatzikonstantinou, Anastasios and Karkalos, Nikolaos E. and Krimpenis, Agathoklis A.},
  title = {Advanced Modeling and Hybrid Manufacturing of Heat Exchangers: Design Considerations, Challenges and Opportunities},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {1362},
  doi = {10.3390/machines14111362}
}
Kostenlos starten →