Material Removal and Dimensional Accuracy in Electrical Discharge Turning of AISI 4140 Steel Under Lateral Flushing and Full Immersion
Machines · 16.11.2026 · 14 (11) · 1360
DOI: 10.3390/machines14111360 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 16.11.2026. Verfasst von Görkem Can Palabıyık und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electrical discharge machining (EDM) offers certain advantages as a thermal process but also has drawbacks. A hybrid system called electrical discharge turning (EDT), which combines traditional turning with EDM, has been developed to overcome these. In this study, experiments were conducted using a copper electrode and cylindrical AISI 4140 tempered steel with a diameter of 12 mm. The experimental design was planned as a full factorial analysis, and the effects of parameters such as dielectric medium, machining depth, discharge current, and workpiece rotational speed on surface roughness (Ra), material removal rate (MRR), tool wear rate (TWR) and dimensional accuracy were investigated. Pulse-on time, pulse-off time and lateral flushing pressure were kept constant. In the experiments, an increase in discharge current increased surface roughness, MRR, and TWR, while an increase in workpiece rotational speed showed similar effects. The effect of discharge current on performance outputs was found to be more pronounced compared to rotational speed. The dielectric medium had no statistically significant main effect on any response. Because the achieved machining depths fell 26–83% short of the intended values, first- and second-order regression models and an XGBoost model based only on controllable process parameters were developed to estimate the depth to be set on the machine. In leave-one-out cross-validation, the second-order regression model (R2 = 0.85, RMSE = 0.56 mm) and the XGBoost model (nested; R2 = 0.82, RMSE = 0.61 mm) clearly outperformed the first-order linear model (R2 = 0.67, RMSE = 0.83 mm); these models require verification with independent experiments before practical use.
Zitieren
APA
Palabıyık, G. C., Özerkan, H. B., Subaşı, M., Mavi, A., Ayhan, E., & Aydoğdu, A. B. (2026). Material Removal and Dimensional Accuracy in Electrical Discharge Turning of AISI 4140 Steel Under Lateral Flushing and Full Immersion. Machines, 14(11), 1360. https://doi.org/10.3390/machines14111360
Vancouver
Palabıyık GC, Özerkan HB, Subaşı M, Mavi A, Ayhan E, Aydoğdu AB. Material Removal and Dimensional Accuracy in Electrical Discharge Turning of AISI 4140 Steel Under Lateral Flushing and Full Immersion. Machines. 2026;14(11):1360. doi:10.3390/machines14111360
BibTeX
@article{Palabyk2026,
author = {Palabıyık, Görkem Can and Özerkan, Hacı Bekir and Subaşı, Mehmet and Mavi, Ahmet and Ayhan, Emre and Aydoğdu, Ali Berk},
title = {Material Removal and Dimensional Accuracy in Electrical Discharge Turning of AISI 4140 Steel Under Lateral Flushing and Full Immersion},
journal = {Machines},
year = {2026},
volume = {14},
number = {11},
pages = {1360},
doi = {10.3390/machines14111360}
}
EUVIMED