EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Experimental and Numerical Investigation of Pure Rolling Gear Pairs with Different Tooth-Profile Definitions

Chonghua Zhu, Xikai Xiang, Zixin Fang, Zhiji Zou, Hui Yang, Xiaoping Xiao, Zhen Chen

Machines · 16.11.2026 · 14 (11) · 1353

DOI: 10.3390/machines14111353 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 16.11.2026. Verfasst von Chonghua Zhu und 6 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, State Key Laboratory of Mechanical Transmission for Advanced Equipment, Chongqing University, Zhanjiang Municipal Science and Technology Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditional gear transmission involves relative sliding between mating tooth flanks, which can cause frictional losses and influence transmission efficiency, thermal response, and dynamic performance. This study compares three gear pairs: Type N (pure rolling gears with a circular-arc tooth profile in the normal section), Type T (pure rolling gears with a circular-arc tooth profile in the transverse section), and Type INV (involute helical gears). The loaded transmission error (LTE) characteristics of Type N and Type T are compared over eight helix angle conditions from 10° to 45°. Transmission efficiency and sound pressure level are experimentally evaluated for all three gear pairs over a speed range of 200–450 rpm and a load-torque range of 1–6 N·m. Infrared thermography is used to compare the thermal response of Type N and Type INV after 1 h of continuous operation at 6 N·m and input speeds of 400 and 500 rpm. The LTE comparison indicates that Type T exhibits lower peak-to-peak LTE than Type N over the investigated helix angle range, with non-monotonic variations for both types. At 400 rpm and 6 N·m, the transmission efficiencies of Type N, Type T, and Type INV are 98.795%, 98.305%, and 96.204%, respectively, while their corresponding sound pressure levels are 74.71, 72.78, and 77.16 dB(A). Type N also exhibits a lower meshing-region temperature rise than Type INV at both thermal-test speeds. The results reveal distinct motion-transmission, energy-transmission, acoustic, and thermal characteristics among the investigated tooth-profile designs.

Förderung

  • National Natural Science Foundation of China
  • State Key Laboratory of Mechanical Transmission for Advanced Equipment, Chongqing University
  • Zhanjiang Municipal Science and Technology Project
  • Program for Scientific Research Start-up Funds of Guangdong Ocean University
  • Guangdong Ocean University Student Innovation Team Project

Zitieren

APA

Zhu, C., Xiang, X., Fang, Z., Zou, Z., Yang, H., Xiao, X., & Chen, Z. (2026). Comparative Experimental and Numerical Investigation of Pure Rolling Gear Pairs with Different Tooth-Profile Definitions. Machines, 14(11), 1353. https://doi.org/10.3390/machines14111353

Vancouver

Zhu C, Xiang X, Fang Z, Zou Z, Yang H, Xiao X, et al. Comparative Experimental and Numerical Investigation of Pure Rolling Gear Pairs with Different Tooth-Profile Definitions. Machines. 2026;14(11):1353. doi:10.3390/machines14111353

BibTeX
@article{Zhu2026,
  author = {Zhu, Chonghua and Xiang, Xikai and Fang, Zixin and Zou, Zhiji and Yang, Hui and Xiao, Xiaoping and Chen, Zhen},
  title = {Comparative Experimental and Numerical Investigation of Pure Rolling Gear Pairs with Different Tooth-Profile Definitions},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {1353},
  doi = {10.3390/machines14111353}
}
Kostenlos starten →