Saturation-Enhanced Multiple-Coupled Circuit Model for Simulation-Based Fault Diagnosis of Induction Motors Across Load Conditions
Machines · 10.11.2026 · 14 (11) · 1329
DOI: 10.3390/machines14111329 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 10.11.2026. Verfasst von Moritz Benninger und 1 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aalen University of Applied Sciences.
Abstract (Originalsprache)
Multiple-Coupled Circuit Models (MCCMs) increasingly generate training data for current-based fault diagnosis of induction motors (IMs). Standard MCCMs use one constant saturation factor, identified at a single operating point, which limits the accuracy of simulated current amplitudes across loads. This paper extends a classical MCCM with a load-torque-dependent saturation factor calibrated at two operating points (no load and nominal load) and validates it on a 1.1 kW IM at 0–120% of the rated load. The extension keeps the simulated fundamental current within about 0.1 A of the measurement at all loads, whereas the standard model deviates by up to 0.86 A. A speed regression from the stator current, trained on simulated data, achieves errors below 5 min−1 on measured data at all loads, compared with several hundred min−1 at low load for the standard model. Relative fault-sideband amplitudes (dBc) differ by less than 0.5 dB between both models. Classifiers using sideband features alone perform equally for both models, whereas adding an RMS-current feature degrades classifiers trained on standard-model data by 1.6 to 19.0 percentage points but changes those trained on extended-model data by, at most, 2.4 points. The extension matters for amplitude-based features and estimators, not for sideband-based fault detection.
Förderung
- Aalen University of Applied Sciences
Zitieren
APA
Benninger, M., & Liebschner, M. (2026). Saturation-Enhanced Multiple-Coupled Circuit Model for Simulation-Based Fault Diagnosis of Induction Motors Across Load Conditions. Machines, 14(11), 1329. https://doi.org/10.3390/machines14111329
Vancouver
Benninger M, Liebschner M. Saturation-Enhanced Multiple-Coupled Circuit Model for Simulation-Based Fault Diagnosis of Induction Motors Across Load Conditions. Machines. 2026;14(11):1329. doi:10.3390/machines14111329
BibTeX
@article{Benninger2026,
author = {Benninger, Moritz and Liebschner, Marcus},
title = {Saturation-Enhanced Multiple-Coupled Circuit Model for Simulation-Based Fault Diagnosis of Induction Motors Across Load Conditions},
journal = {Machines},
year = {2026},
volume = {14},
number = {11},
pages = {1329},
doi = {10.3390/machines14111329}
}
EUVIMED