EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Empirical Efficiency Estimation for Three-Stage Cylindrical Gearboxes in the Preliminary Design Phase

Ivett Alexandra Simon, István Gábor Gyurika

Machines · 06.11.2026 · 14 (11) · 1308

DOI: 10.3390/machines14111308 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 06.11.2026. Verfasst von Ivett Alexandra Simon und 1 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NRDI Office and the National Innovation Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Established gearbox efficiency methods disagree and require inputs, such as friction coefficients and face widths, that are often unknown in preliminary design. This study develops an efficiency estimate based only on parameters available at that stage. For a three-stage cylindrical gearbox, we combined the tooth-friction models of Niemann and Duda with bearing, seal, oil-churning and windage losses, evaluated Klein’s single-step total-loss formula, and compared the results with efficiencies measured at four load levels. The loss-based approaches overestimated the measured efficiency; Klein’s formula underestimated it and did not follow the operating conditions. We replaced the friction term of Klein’s formula with an empirical factor fitted, as a function of output speed, to four operating points at which torque and speed varied together; the factor therefore reflects their combined effect, and its exponent is not statistically resolved. The resulting correlation requires only the tooth numbers and the output speed. It reproduced the measured efficiencies of this gearbox and, without refitting, of a second gearbox with a different center distance and ratio within 0.41 percentage points, inside the measurement uncertainty. Both gearboxes have z1 = 19 and z2 = 58–61; the correlation applies only to this design family and load–speed path.

Förderung

  • NRDI Office and the National Innovation Agency

Zitieren

APA

Simon, I. A., & Gyurika, I. G. (2026). Empirical Efficiency Estimation for Three-Stage Cylindrical Gearboxes in the Preliminary Design Phase. Machines, 14(11), 1308. https://doi.org/10.3390/machines14111308

Vancouver

Simon IA, Gyurika IG. Empirical Efficiency Estimation for Three-Stage Cylindrical Gearboxes in the Preliminary Design Phase. Machines. 2026;14(11):1308. doi:10.3390/machines14111308

BibTeX
@article{Simon2026,
  author = {Simon, Ivett Alexandra and Gyurika, István Gábor},
  title = {Empirical Efficiency Estimation for Three-Stage Cylindrical Gearboxes in the Preliminary Design Phase},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {1308},
  doi = {10.3390/machines14111308}
}
Kostenlos starten →