Efficient Base Placement for Mobile Manipulators Under Kinematic and Collision Constraints
Machines · 24.10.2026 · 14 (11) · 1249
DOI: 10.3390/machines14111249 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 24.10.2026. Verfasst von Liqian Zhang und 1 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
Selecting stopping locations (sites) and chassis headings for mobile manipulators requires costly inverse-kinematics and collision checks. We propose critical-gap-guided verification, which checks alternatives for covered tasks that prevent site removal. A capability atlas proposes poses and joint seeds; the planner obtains complete support, then verifies replacements and reselects layouts, seeking fewer sites before fewer headings. On a building information modeling (BIM)-derived benchmark with 1252 height-resolved normal-approach samples, three nominal 60 s runs yield 28, 30 and 28 sites. Relative to low-load transfer, which prioritizes low-workload sites for removal, median sites decrease from 34 to 28 (17.65%), while median headings increase from 51 to 61 (19.61%). Controls favor targeted replacement acquisition, without consistent gains from the priority function or failure weighting. Independent triangle-mesh checks of 1341 saved configurations from three predefined static layouts find no contacts or external-clearance violations at the thirteen checked lift heights. Under a separate whole-body criterion (WB5), the task assignments of five saved plans admit connected model paths with local base motion, without enforcing the original six-dimensional arm-Jacobian screen. Critical-gap conditional model times are 12.67–18.70% lower than transfer under shared assumptions. Clinic and office tests remain incomplete. Broad building-level applicability, tool-equipped execution and actual operating times remain unvalidated.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
Zitieren
APA
Zhang, L., & Liu, J. (2026). Efficient Base Placement for Mobile Manipulators Under Kinematic and Collision Constraints. Machines, 14(11), 1249. https://doi.org/10.3390/machines14111249
Vancouver
Zhang L, Liu J. Efficient Base Placement for Mobile Manipulators Under Kinematic and Collision Constraints. Machines. 2026;14(11):1249. doi:10.3390/machines14111249
BibTeX
@article{Zhang2026,
author = {Zhang, Liqian and Liu, Jinyue},
title = {Efficient Base Placement for Mobile Manipulators Under Kinematic and Collision Constraints},
journal = {Machines},
year = {2026},
volume = {14},
number = {11},
pages = {1249},
doi = {10.3390/machines14111249}
}
EUVIMED