A Hybrid Flux-Frame High-Frequency Injection and MRAC-Based Sensorless Rotor Position and Speed Estimation Scheme for Advanced DTC IPMSM Drives
Machines · 03.10.2026 · 14 (10) · 1153
DOI: 10.3390/machines14101153 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 03.10.2026. Verfasst von Anshu Choudhary und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents a hybrid flux-frame high-frequency (HF) injection and model reference adaptive control (MRAC)-based sensorless rotor position and speed estimation scheme for advanced direct torque-controlled interior permanent magnet synchronous motor (IPMSM) drives. Unlike conventional stationary-frame (α-β) HF-injection methods, the proposed technique demodulates the injected high-frequency current directly in the stator-flux reference frame, yielding a saliency signal with reduced cross-coupling and improved estimation fidelity at zero and low speed. At medium-to-high speed, an adaptive MRAC estimator, driven by the stator-current error, provides back-EMF-based speed and angle estimation. A speed-dependent gating mechanism blends the two estimators, avoiding the discontinuous angle transitions typically introduced by hard-switched hybrid observers. The complete estimation and control algorithm, including a constant-switching-frequency torque regulator, is implemented and validated through processor-in-the-loop (PIL) co-simulation on a Texas Instruments LAUNCHXL-F280039C DSP-based microcontroller. Simulation and PIL results confirm the practical feasibility of the proposed hybrid estimation scheme, which offers reduced implementation complexity compared to Field-Oriented Control (FOC)-based sensorless techniques predominantly reported in the literature, since direct torque control (DTC) inherently avoids continuous coordinate rotation and current–vector modulation. Successful validation on the single-core, cost-effective LAUNCHXL-F280039C microcontroller, compared to higher-end dual-core DSP platforms (e.g., the F2837xD series) typically used in sensorless drive research, further demonstrates the suitability of the proposed approach for low-cost, resource-constrained embedded motor drive implementations.
Zitieren
APA
Choudhary, A., Bhowmik, P. S., & Saha, A. K. (2026). A Hybrid Flux-Frame High-Frequency Injection and MRAC-Based Sensorless Rotor Position and Speed Estimation Scheme for Advanced DTC IPMSM Drives. Machines, 14(10), 1153. https://doi.org/10.3390/machines14101153
Vancouver
Choudhary A, Bhowmik PS, Saha AK. A Hybrid Flux-Frame High-Frequency Injection and MRAC-Based Sensorless Rotor Position and Speed Estimation Scheme for Advanced DTC IPMSM Drives. Machines. 2026;14(10):1153. doi:10.3390/machines14101153
BibTeX
@article{Choudhary2026,
author = {Choudhary, Anshu and Bhowmik, Partha Sarathee and Saha, Akshay Kumar},
title = {A Hybrid Flux-Frame High-Frequency Injection and MRAC-Based Sensorless Rotor Position and Speed Estimation Scheme for Advanced DTC IPMSM Drives},
journal = {Machines},
year = {2026},
volume = {14},
number = {10},
pages = {1153},
doi = {10.3390/machines14101153}
}
EUVIMED