A Physics-Guided Statistical Framework for Bearing Fault Diagnosis Under Unit Variability and Rotational Speed Uncertainty
Machines · 02.10.2026 · 14 (10) · 1140
DOI: 10.3390/machines14101140 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 02.10.2026. Verfasst von Muhammad Farooq Siddique und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Reliable bearing fault diagnosis must differentiate between defects and normal-operation-condition variation. The predictor must remain accurate when shaft speed is uncertain. Conventional accuracy-driven models often ignore false-positive rates and fail to accurately locate faults on unseen bearings’ data. This study proposes a physics-guided statistical framework that integrates resolution-based order screening, envelope peak-to-floor evidence, search- and collision-matched empirical nulls, and conformal calibration against healthy reference data. A two-stage bearing-level rule detects abnormal operation before localizing the dominant fault order. Evaluation comprised controlled simulations, unit-disjoint Paderborn experiments, and a prospectively frozen external test using the University of Ottawa Rolling-Element Dataset: Vibration and Acoustic Faults under Constant Load and Speed Conditions (UORED-VAFCLS). In simulation, family-wise false-positive rates were 2.58% and 3.12% for the two bearing geometries; detection power reached 83.3–93.8% at −4 dB and 98.3–100% at 0 dB, satisfying all registered criteria. On Paderborn, the overall false-positive rate was 7.08%, but condition-specific false alarms reached 17.5%; inner- and outer-race detection reached only 49.8% and 71.5%, despite high localization accuracy. On UORED-VAFCLS, the healthy false-alarm rate remained 5% (1/20 bearings), while developing-fault detection was 40% for both classes and faulty-state detection was 0% for inner-race and 20% for outer-race bearings. All ten inner-race states were mislocalized to the outer-race order. A post-evaluation diagnostic estimated a median speed of 1784 rpm rather than 1750 rpm. The resulting 1.94% discrepancy exceeded the admissible errors for the ball-pass frequency of the inner race (BPFI) and ball-pass frequency of the outer race (BPFO), 0.61% and 0.98%, respectively, indicating order-probe misalignment. These results show that false-alarm calibration can transfer while diagnostic sensitivity and physical localization fail. The study therefore separates calibration from diagnostic transferability and establishes independent bearing-level validation and explicit speed-uncertainty treatment as requirements for trustworthy physics-guided diagnosis.
Zitieren
APA
Siddique, M. F., Wisal, M., Umar, M., Ali, S., Janjua, M. M., Khalid, H. M., Haneef, Z., & Akhtar, N. (2026). A Physics-Guided Statistical Framework for Bearing Fault Diagnosis Under Unit Variability and Rotational Speed Uncertainty. Machines, 14(10), 1140. https://doi.org/10.3390/machines14101140
Vancouver
Siddique MF, Wisal M, Umar M, Ali S, Janjua MM, Khalid HM, et al. A Physics-Guided Statistical Framework for Bearing Fault Diagnosis Under Unit Variability and Rotational Speed Uncertainty. Machines. 2026;14(10):1140. doi:10.3390/machines14101140
BibTeX
@article{Siddique2026,
author = {Siddique, Muhammad Farooq and Wisal, Muhammad and Umar, Muhammad and Ali, Saad and Janjua, Muhammad Mansoor and Khalid, Haris M. and Haneef, Zalan and Akhtar, Nasir},
title = {A Physics-Guided Statistical Framework for Bearing Fault Diagnosis Under Unit Variability and Rotational Speed Uncertainty},
journal = {Machines},
year = {2026},
volume = {14},
number = {10},
pages = {1140},
doi = {10.3390/machines14101140}
}
EUVIMED