A Cross-Cycle Dead Zone Compensation Strategy for Phase Current Reconstruction in PMSM Drives
Machines · 06.08.2026 · 14 (8) · 896
DOI: 10.3390/machines14080896 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 06.08.2026. Verfasst von Shilong Liu und 7 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In single DC-link current sensor-based phase current reconstruction for permanent magnet synchronous motor (PMSM) drives, the current reconstruction dead zone caused by insufficient active voltage vector duration restricted by driver dead time, switching settling, and Analog to Digital Converter (ADC) latency degrades current sensing accuracy, particularly in low modulation and sector boundary regions. Conventional phase shift methods, while extending the sampling window through Pulse Width Modulation (PWM) pattern modification, inevitably introduce asymmetric switching sequences that generate additional phase current harmonics and may reduce the linear modulation range. This article analytically characterizes the dead zone formation mechanism across the space vector plane and proposes a cross-cycle compensation strategy based on vector approximation. The method replaces the reference voltage vector with the nearest measurable vector in the present switching cycle and compensates for the resulting voltage error in the subsequent cycle, thereby extending the sampling window while preserving precise volt-second balance without extra hardware. Experimental results demonstrate that the proposed method eliminates the current reconstruction dead zone, achieves high-fidelity phase current reconstruction, and ensures robust dynamic performance under various load conditions and transients. The feasibility and effectiveness of the single current sensor drive are thoroughly validated.
Zitieren
APA
Liu, S., Tian, Y., Galvan, E., Carrasco, J. M., Zhai, Y., Zhu, P., Zhang, W., & Vazquez, S. (2026). A Cross-Cycle Dead Zone Compensation Strategy for Phase Current Reconstruction in PMSM Drives. Machines, 14(8), 896. https://doi.org/10.3390/machines14080896
Vancouver
Liu S, Tian Y, Galvan E, Carrasco JM, Zhai Y, Zhu P, et al. A Cross-Cycle Dead Zone Compensation Strategy for Phase Current Reconstruction in PMSM Drives. Machines. 2026;14(8):896. doi:10.3390/machines14080896
BibTeX
@article{Liu2026,
author = {Liu, Shilong and Tian, Yihong and Galvan, Eduardo and Carrasco, Juan M. and Zhai, Yanchen and Zhu, Pengcheng and Zhang, Wentao and Vazquez, Sergio},
title = {A Cross-Cycle Dead Zone Compensation Strategy for Phase Current Reconstruction in PMSM Drives},
journal = {Machines},
year = {2026},
volume = {14},
number = {8},
pages = {896},
doi = {10.3390/machines14080896}
}
EUVIMED