EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Fault-Tolerant Finite-Control-Set MPC Architecture with Asymmetry-Aware Thermal Balancing for Switched Reluctance Motor Drives

Franklin Sánchez, María Isabel Milanés-Montero, Enrique Romero-Cadaval

Machines · 18.07.2026 · 14 (7) · 817

DOI: 10.3390/machines14070817 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 18.07.2026. Verfasst von Franklin Sánchez und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Switched reluctance motors (SRMs) are attractive for fault-tolerant drives because their rare-earth-free rotor and intrinsic phase isolation support continued operation after a converter fault. Realising this requires a post-fault control policy that preserves both torque tracking and per-phase thermal balance, with the latter being a safety-relevant design consideration motivated by—though not herein verified against—ISO 26262. This paper proposes and evaluates, by simulation, a three-layer fault-tolerant finite-control-set model predictive control (FCS-MPC) architecture for a four-phase 8/6 SRM under a single open-phase converter fault. The layers are (i) a vector-set reconfiguration from the eight healthy, active vectors to the twenty-six admissible post-fault vectors, which restores controllability of the reduced converter; (ii) soft commutation expressed as a position-dependent penalty inside the MPC cost; and (iii) asymmetry-aware balancing that evens out the accumulated thermal load across the three healthy phases. We additionally analyse an activated-on-demand max-penalty thermal limiter and show, both analytically and in simulation, that it shares its optimiser with the variance-based balancing term and therefore confers no measurable benefit over it; it is consequently retained only as an optional on-demand limiter rather than a separate layer. The architecture is benchmarked against a fault-blind baseline, a rule-based hard fault-tolerant reference (Hard-FT), and intermediate configurations through a deterministic ablation across three critical operating points, complemented by a robustness assessment under measurement noise and parameter mismatch. A six-criteria fault-tolerance scorecard is reported as a methodological observation on the transferability of healthy-mode SRM specifications to post-fault operation.

Zitieren

APA

Sánchez, F., Milanés-Montero, M. I., & Romero-Cadaval, E. (2026). A Fault-Tolerant Finite-Control-Set MPC Architecture with Asymmetry-Aware Thermal Balancing for Switched Reluctance Motor Drives. Machines, 14(7), 817. https://doi.org/10.3390/machines14070817

Vancouver

Sánchez F, Milanés-Montero MI, Romero-Cadaval E. A Fault-Tolerant Finite-Control-Set MPC Architecture with Asymmetry-Aware Thermal Balancing for Switched Reluctance Motor Drives. Machines. 2026;14(7):817. doi:10.3390/machines14070817

BibTeX
@article{Snchez2026,
  author = {Sánchez, Franklin and Milanés-Montero, María Isabel and Romero-Cadaval, Enrique},
  title = {A Fault-Tolerant Finite-Control-Set MPC Architecture with Asymmetry-Aware Thermal Balancing for Switched Reluctance Motor Drives},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {7},
  pages = {817},
  doi = {10.3390/machines14070817}
}
Kostenlos starten →