EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on the Mechanical Mechanism and Detection Technology of Abnormal Wear and Contact Wire Disengagement in Rigid Overhead Contact Systems

Chang Liu, Zhaofeng Gong, Chenglong Yin, Zhiheng Wei, Qihao Wang, Wenzheng Liu

Machines · 14.07.2026 · 14 (7) · 800

DOI: 10.3390/machines14070800 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 14.07.2026. Verfasst von Chang Liu und 5 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Academy of Railway Sciences Corporation Limited.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The disengagement of contact wires in rigid overhead contact systems (ROCS) is a critical hazard to urban rail transit, potentially causing pantograph–catenary collisions, wire breakage, and large-scale catenary failures. To investigate its mechanical mechanism and detection approach, a three-dimensional solid and flexible multibody coupled model of a rigid pantograph–catenary system was established using finite element analysis and multibody dynamics simulation. The effects of train speed, contact force fluctuation, contact wire stress concentration, and disengagement degree on pantograph–catenary dynamic behavior were analyzed. The results show that the standard deviation of contact force at overlapping spans is significantly higher than that in other sections, indicating that overlapping spans are high-risk regions for disengagement. The peak stress of the contact wire is mainly concentrated at registration points and increases with train speed, which may promote abnormal wear and local deformation of the conductor rail jaw. Field-observed environmental degradation factors, such as tunnel water leakage, corrosion, and conductive grease deterioration, may further weaken the clamping performance of the conductor rail. Hazard simulations show that disengagement at overlapping spans deteriorates current collection quality and aggravates carbon strip wear, especially at the beginning of the subsequent overlapping span. Based on onboard inspection equipment, an engineering detection route integrating area-scan imaging, three-dimensional profile scanning, and line-scan imaging is proposed to support the inspection of severe and minor disengagement defects.

Förderung

  • China Academy of Railway Sciences Corporation Limited

Zitieren

APA

Liu, C., Gong, Z., Yin, C., Wei, Z., Wang, Q., & Liu, W. (2026). Research on the Mechanical Mechanism and Detection Technology of Abnormal Wear and Contact Wire Disengagement in Rigid Overhead Contact Systems. Machines, 14(7), 800. https://doi.org/10.3390/machines14070800

Vancouver

Liu C, Gong Z, Yin C, Wei Z, Wang Q, Liu W. Research on the Mechanical Mechanism and Detection Technology of Abnormal Wear and Contact Wire Disengagement in Rigid Overhead Contact Systems. Machines. 2026;14(7):800. doi:10.3390/machines14070800

BibTeX
@article{Liu2026,
  author = {Liu, Chang and Gong, Zhaofeng and Yin, Chenglong and Wei, Zhiheng and Wang, Qihao and Liu, Wenzheng},
  title = {Research on the Mechanical Mechanism and Detection Technology of Abnormal Wear and Contact Wire Disengagement in Rigid Overhead Contact Systems},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {7},
  pages = {800},
  doi = {10.3390/machines14070800}
}
Kostenlos starten →