Asymmetric S-Curve Velocity Control for Smooth Obstacle-Avoidance Trajectory Execution in Stepper-Motor-Driven Selective Compliance Assembly Robot Arms
Machines · 07.07.2026 · 14 (7) · 764
DOI: 10.3390/machines14070764 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 07.07.2026. Verfasst von Qihui Guo und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation.
Abstract (Originalsprache)
Stepper-motor-driven Selective Compliance Assembly Robot Arms are susceptible to motion control challenges under short-stroke and high-frequency start–stop conditions, including high sensitivity to pulse timing, difficulty in multi-joint coordination, and insufficient trajectory smoothness. To address these issues, this paper proposes an optimized motion control method for smooth execution of obstacle-avoidance trajectories, integrating path smoothing, asymmetric S-curve velocity planning, and pulse-frequency-based multi-axis synchronization. First, piecewise cubic Hermite interpolation, Gaussian smoothing, and end-effector-based equidistant resampling are applied to post-process Rapidly-exploring Random Tree-generated paths, thereby eliminating polyline turning points and improving uniformity of waypoint distribution. Second, an asymmetric S-curve velocity planning method with nonzero boundary velocity constraints is developed, and multi-axis synchronization is achieved based on the maximum segment duration principle. Finally, instantaneous reference velocities are converted into per-axis pulse frequency commands via proportional mapping, enabling real-time stepper motor drive control. Experimental results show that the proposed method reduces the obstacle-avoidance path length by 8.52% and significantly decreases the dispersion of trajectory step sizes. In single-segment dynamic simulations, the proposed method reduces the peak dynamic output force by 62%. In real robot experiments, the average motion time across three obstacle-avoidance tasks is reduced by approximately 55.21%, while end-effector trajectory continuity and inter-joint coordination are improved, suggesting the effectiveness and preliminary engineering feasibility of the proposed method under the tested conditions.
Förderung
- Russian Science Foundation
Zitieren
APA
Guo, Q., Grigorev, M. A., Zhang, Z., Kholodilin, I., Kushnarev, V., Khriukin, D., & Maksimov, N. (2026). Asymmetric S-Curve Velocity Control for Smooth Obstacle-Avoidance Trajectory Execution in Stepper-Motor-Driven Selective Compliance Assembly Robot Arms. Machines, 14(7), 764. https://doi.org/10.3390/machines14070764
Vancouver
Guo Q, Grigorev MA, Zhang Z, Kholodilin I, Kushnarev V, Khriukin D, et al. Asymmetric S-Curve Velocity Control for Smooth Obstacle-Avoidance Trajectory Execution in Stepper-Motor-Driven Selective Compliance Assembly Robot Arms. Machines. 2026;14(7):764. doi:10.3390/machines14070764
BibTeX
@article{Guo2026,
author = {Guo, Qihui and Grigorev, Maksim A. and Zhang, Zihan and Kholodilin, Ivan and Kushnarev, Victor and Khriukin, Dmitry and Maksimov, Nikita},
title = {Asymmetric S-Curve Velocity Control for Smooth Obstacle-Avoidance Trajectory Execution in Stepper-Motor-Driven Selective Compliance Assembly Robot Arms},
journal = {Machines},
year = {2026},
volume = {14},
number = {7},
pages = {764},
doi = {10.3390/machines14070764}
}
EUVIMED