EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mathematical Modeling and G-Code Generation for CNC Plasma Tube Notching at Arbitrary Intersection Angles

Víctor Manuel Vega-Gutierrez, Israel Martínez-Ramírez, Jorge Andrés Ortega-Contreras, Sebastian Santarrosa-Rodriguez, Isaí Espinoza-Torres, Felipe J. Torres, Miguel Ernesto Gutierrez-Rivera

Machines · 01.06.2026 · 14 (6) · 631

DOI: 10.3390/machines14060631 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 01.06.2026. Verfasst von Víctor Manuel Vega-Gutierrez und 6 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONAHCYT doctoral scholarship, University of Guanajuato.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The tube-notching process is widely used to manufacture structural joints and ducting systems for fluid transport. In these applications, accurate intersection angles and proper fit-up geometry are essential to ensure reliable assembly and system performance. Consequently, CNC-based automation is increasingly adopted to improve productivity in operations where precision and cycle time are critical. The main problem, however, lies in the complexity of generating accurate cutting trajectories for tube–tube intersections and converting them into machine-executable commands. This study addresses this gap by proposing a simple, novel mathematical model for toolpath generation capable of producing intersection profiles at arbitrary joint angles, including lateral offset (non-coaxial) configurations. A systematic procedure was developed to convert the resulting trajectories into G-code, which was processed in a low-cost CNC plasma cutter designed to experimentally validate the toolpaths. The machine incorporates a fourth axis to enable bevel cutting during tube processing. Experimental results demonstrate stable operation, high dimensional accuracy (error ±0.1°), and consistent cut quality for trajectories generated by the proposed model, confirming the feasibility of the low-cost CNC plasma system and its scalability to diverse fabrication requirements.

Förderung

  • CONAHCYT doctoral scholarship
  • University of Guanajuato

Zitieren

APA

Vega-Gutierrez, V. M., Martínez-Ramírez, I., Ortega-Contreras, J. A., Santarrosa-Rodriguez, S., Espinoza-Torres, I., Torres, F. J., & Gutierrez-Rivera, M. E. (2026). Mathematical Modeling and G-Code Generation for CNC Plasma Tube Notching at Arbitrary Intersection Angles. Machines, 14(6), 631. https://doi.org/10.3390/machines14060631

Vancouver

Vega-Gutierrez VM, Martínez-Ramírez I, Ortega-Contreras JA, Santarrosa-Rodriguez S, Espinoza-Torres I, Torres FJ, et al. Mathematical Modeling and G-Code Generation for CNC Plasma Tube Notching at Arbitrary Intersection Angles. Machines. 2026;14(6):631. doi:10.3390/machines14060631

BibTeX
@article{VegaGutierrez2026,
  author = {Vega-Gutierrez, Víctor Manuel and Martínez-Ramírez, Israel and Ortega-Contreras, Jorge Andrés and Santarrosa-Rodriguez, Sebastian and Espinoza-Torres, Isaí and Torres, Felipe J. and Gutierrez-Rivera, Miguel Ernesto},
  title = {Mathematical Modeling and G-Code Generation for CNC Plasma Tube Notching at Arbitrary Intersection Angles},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {631},
  doi = {10.3390/machines14060631}
}
Kostenlos starten →