EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Friction and Wear Behavior of General Freight Train Composite Brake Shoes with Reinforced Steel Fibers

Hengxi Wang, Xin Zhang, Guansong Chen, Jiazheng Song, José Manuel Martínez-Esnaola, Chun Lu

Machines · 21.05.2026 · 14 (5) · 573

DOI: 10.3390/machines14050573 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 21.05.2026. Verfasst von Hengxi Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Sichuan Province, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High friction composite brake shoes containing reinforced steel fibers are now widely used in freight train tread braking systems. With the demand for higher transportation efficiency on railway lines with long steep slopes, it is necessary to explore the braking capabilities of existing general freight train high friction composite brake shoes under continuous braking conditions. In this paper, continuous braking tests at different speed levels were conducted using a friction and wear test rig. Through material characterization and interface damage analysis, it was found that reinforced steel fibers can exist as a contact platform at the brake shoe friction interface. Due to the strip-like morphology and high strength features of steel fibers, even after the steel fiber layer is fragmented, it can still promote the formation of a continuous contact platform with complex material composition on the surface, maintaining the progress of the braking process. For existing general freight train high friction composite brake shoes, at speeds up to 80 km/h, although the friction coefficient decreases to some extent, the wear rate maintains a relatively low range. When the speed increases to 100 km/h, the friction coefficient of the braking interface deteriorates severely, and the wear rate of the brake shoe increases sharply, seriously endangering braking safety. The research results reveal the evolution of wear behavior of high friction composite brake shoes containing reinforced steel fibers at different speed levels, providing theoretical support for exploring the braking capabilities and design optimization of brake shoes.

Förderung

  • Natural Science Foundation of Sichuan Province
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Wang, H., Zhang, X., Chen, G., Song, J., Martínez-Esnaola, J. M., & Lu, C. (2026). Friction and Wear Behavior of General Freight Train Composite Brake Shoes with Reinforced Steel Fibers. Machines, 14(5), 573. https://doi.org/10.3390/machines14050573

Vancouver

Wang H, Zhang X, Chen G, Song J, Martínez-Esnaola JM, Lu C. Friction and Wear Behavior of General Freight Train Composite Brake Shoes with Reinforced Steel Fibers. Machines. 2026;14(5):573. doi:10.3390/machines14050573

BibTeX
@article{Wang2026,
  author = {Wang, Hengxi and Zhang, Xin and Chen, Guansong and Song, Jiazheng and Martínez-Esnaola, José Manuel and Lu, Chun},
  title = {Friction and Wear Behavior of General Freight Train Composite Brake Shoes with Reinforced Steel Fibers},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {5},
  pages = {573},
  doi = {10.3390/machines14050573}
}
Kostenlos starten →