EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Control of Handling Stability for Active Inward Tilt Vehicles Based on the Phase-Plane Lateral Stability Region

Chen Zhang, Jialing Yao

Machines · 14.05.2026 · 14 (5) · 552

DOI: 10.3390/machines14050552 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 14.05.2026. Verfasst von Chen Zhang und 1 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For autonomous vehicles, high-speed cornering can easily lead to degraded handling stability and increased risks of sideslip or even rollover. Therefore, vehicle phase-plane stability-region analysis has become an important topic in active safety-control research. However, most existing studies still construct phase-plane stability regions mainly based on simplified vehicle models, without sufficiently considering the influence of vertical load transfer during cornering on tire lateral forces and stability boundaries. To address this issue, this paper proposes a hierarchical control strategy based on phase-plane analysis for active inward tilt vehicles. This method adopts a three-degree-of-freedom vehicle dynamics model and a tire model. By carefully comparing the phase-plane stability regions of active inward tilt and passive roll vehicles and by further analyzing the state-trajectory convergence characteristics of active inward tilt vehicles under different longitudinal speeds, front wheel steering angles, and road adhesion coefficients, the effects of active inward tilt on stability-region expansion and vehicle-state convergence are revealed. Subsequently, a hierarchical control strategy is proposed as an integrated solution to improve vehicle handling stability. The upper-level controller dynamically adjusts the reference values and objective weights according to whether the vehicle state is located in the stable, critical, or dangerous region. The lower-level NMPC controller optimizes the front wheel steering angle and active suspension forces to achieve coordinated trajectory tracking and stability control. Double lane-change simulation results show that active inward tilt can improve the left–right vertical load distribution and expand the lateral stability region. Compared with passive roll and conventional active inward tilt control, the proposed strategy reduces the phase-plane state convergence area by 68% and 75%, respectively, thereby improving vehicle handling stability and active safety under extreme conditions.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, C., & Yao, J. (2026). The Control of Handling Stability for Active Inward Tilt Vehicles Based on the Phase-Plane Lateral Stability Region. Machines, 14(5), 552. https://doi.org/10.3390/machines14050552

Vancouver

Zhang C, Yao J. The Control of Handling Stability for Active Inward Tilt Vehicles Based on the Phase-Plane Lateral Stability Region. Machines. 2026;14(5):552. doi:10.3390/machines14050552

BibTeX
@article{Zhang2026,
  author = {Zhang, Chen and Yao, Jialing},
  title = {The Control of Handling Stability for Active Inward Tilt Vehicles Based on the Phase-Plane Lateral Stability Region},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {5},
  pages = {552},
  doi = {10.3390/machines14050552}
}
Kostenlos starten →