Rigid-Body Dynamics Modeling and Core Functional Component Selection for Heavy-Duty Industrial Robots
Machines · 08.05.2026 · 14 (5) · 528
DOI: 10.3390/machines14050528 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 08.05.2026. Verfasst von Wei Han und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Foundation of the Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education.
Abstract (Originalsprache)
The selection and design of core functional components are a primary task in the engineering design of heavy-duty industrial robots, in which joint constraint forces and moments act as essential indicators for component selection. This paper proposes a general inverse rigid-body dynamics model for serial kinematic chains that explicitly incorporates joint constraint forces and moments. On this basis, a rigid-body dynamics model for heavy-duty industrial robots is established, which fully considers inertia, gravity, and balancing forces of the balance system, and is verified through dynamic simulations. Corresponding selection and design criteria are then formulated for joint motors, RV reducers, and balance systems. Simulation analyses and prototype full-load tests jointly confirm that the robot meets the 1000 kg load capacity requirement and validate the effectiveness of the proposed selection and design criteria. This study provides a reliable theoretical and engineering reference for the design and development of heavy-duty industrial robots.
Förderung
- National Natural Science Foundation of China
- Open Foundation of the Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education
Zitieren
APA
Han, W., Shan, X., Tong, T., Liu, H., & Xiao, J. (2026). Rigid-Body Dynamics Modeling and Core Functional Component Selection for Heavy-Duty Industrial Robots. Machines, 14(5), 528. https://doi.org/10.3390/machines14050528
Vancouver
Han W, Shan X, Tong T, Liu H, Xiao J. Rigid-Body Dynamics Modeling and Core Functional Component Selection for Heavy-Duty Industrial Robots. Machines. 2026;14(5):528. doi:10.3390/machines14050528
BibTeX
@article{Han2026,
author = {Han, Wei and Shan, Xianlei and Tong, Tong and Liu, Haitao and Xiao, Juliang},
title = {Rigid-Body Dynamics Modeling and Core Functional Component Selection for Heavy-Duty Industrial Robots},
journal = {Machines},
year = {2026},
volume = {14},
number = {5},
pages = {528},
doi = {10.3390/machines14050528}
}
EUVIMED