Development of Cable-Laying Robot Based on Reconfigurable Single-Actuator-Wave Units
Machines · 08.05.2026 · 14 (5) · 521
DOI: 10.3390/machines14050521 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 08.05.2026. Verfasst von Fuga Inagaki und 2 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The purpose of this study is to develop a robot that reduces labor and automates cable-laying work at construction sites. The robot should have the ability to pull lead cables over cable racks and ceiling spaces. Therefore, we propose a reconfigured active-cord-mechanism robot based on the RSAW mechanism that can move in both environments by maintaining continuous traveling wave propagation across multiple units connected through joints. A prototype robot was first constructed to verify the applicability of the RSAW mechanism to cable-laying environments. However, the discontinuity of the traveling wave at the joint connections prevented the prototype from traversing ceiling spaces. Based on this finding, a new robot was developed with a configuration that ensures continuous wave propagation across the joints through mechanical design and phase synchronization control. As a result, the new robot enhances propulsion speed and cable traction. Additionally, the robot can move over ceiling joint receivers that exist in ceiling spaces. Comparative analysis with previous prototype robots and a snake-like robot highlights this robot’s advantages, including reduced motor count, autonomous operation with mounted power and control units, and superior turning capabilities.
Zitieren
APA
Inagaki, F., Sadasue, Y., & Iwase, M. (2026). Development of Cable-Laying Robot Based on Reconfigurable Single-Actuator-Wave Units. Machines, 14(5), 521. https://doi.org/10.3390/machines14050521
Vancouver
Inagaki F, Sadasue Y, Iwase M. Development of Cable-Laying Robot Based on Reconfigurable Single-Actuator-Wave Units. Machines. 2026;14(5):521. doi:10.3390/machines14050521
BibTeX
@article{Inagaki2026,
author = {Inagaki, Fuga and Sadasue, Yuki and Iwase, Masami},
title = {Development of Cable-Laying Robot Based on Reconfigurable Single-Actuator-Wave Units},
journal = {Machines},
year = {2026},
volume = {14},
number = {5},
pages = {521},
doi = {10.3390/machines14050521}
}
EUVIMED