Loop-Constrained Connectivity Calculation for Planar Multi-Loop Mechanisms: Base–End-Effector Localization and Functional-Constraint Screening
Machines · 20.04.2026 · 14 (4) · 455
DOI: 10.3390/machines14040455 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 20.04.2026. Verfasst von Xiaoxiong Li und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Planar multi-loop mechanisms often generate a large number of non-isomorphic candidate topological graphs during automatic synthesis, making it difficult to efficiently identify configurations that satisfy engineering-oriented functional requirements. To address this issue, a loop-constrained connectivity calculation method and a connectivity-based localization and screening procedure are proposed. The proposed connectivity calculation is directly formulated for general planar non-fractionated kinematic chains (NFKCs), including those with multiple joints. For planar fractionated kinematic chains (FKCs), however, the present method is not applied directly at the full-system level, but only to decomposed non-fractionated subchains after system-level decomposition. Starting from a structurally admissible set of candidate topological graphs, a connectivity matrix is established for automatic localization of the base and the end-effector (EE). Functional screening is then performed by combining the connectivity criterion with object-oriented rules on hydraulic driving-pair arrangement and driving-redundancy patterns. The method was validated using the 10-link, 3-DOF single-joint equivalent of the KC1 subchain of a mine scaler manipulator arm. Under the prescribed structural and functional constraints, 249 admissible configurations were obtained. The results indicate that the proposed method provides an effective basis for application-oriented topological screening and subsequent dimensional synthesis.
Zitieren
APA
Li, X., & Ding, H. (2026). Loop-Constrained Connectivity Calculation for Planar Multi-Loop Mechanisms: Base–End-Effector Localization and Functional-Constraint Screening. Machines, 14(4), 455. https://doi.org/10.3390/machines14040455
Vancouver
Li X, Ding H. Loop-Constrained Connectivity Calculation for Planar Multi-Loop Mechanisms: Base–End-Effector Localization and Functional-Constraint Screening. Machines. 2026;14(4):455. doi:10.3390/machines14040455
BibTeX
@article{Li2026,
author = {Li, Xiaoxiong and Ding, Huafeng},
title = {Loop-Constrained Connectivity Calculation for Planar Multi-Loop Mechanisms: Base–End-Effector Localization and Functional-Constraint Screening},
journal = {Machines},
year = {2026},
volume = {14},
number = {4},
pages = {455},
doi = {10.3390/machines14040455}
}
EUVIMED