Multi-Objective Design Optimization of a MW Machine Using Hybrid Evolutionary Algorithm and Artificial Neural Networks
Machines · 08.04.2026 · 14 (4) · 408
DOI: 10.3390/machines14040408 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 08.04.2026. Verfasst von Srikanth Pillai und 3 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In the aviation sector, there is a growing demand for high-specific-power electrical machines to realize More Electric Aircraft (MEA). The goals for these machines were set by the National Aeronautics and Space Administration (NASA) as 1 MW power, >13 kW kg−1 of power density, and efficiency >96%. To address these requirements, this paper proposes an electromagnetic design of a high-speed, power-dense, 1 MW radial-flux Permanent Magnet Synchronous Machine (PMSM) for aerospace propulsion applications that achieves NASA targets. Achieving high-specific-power objectives necessitates geometry optimization that simultaneously minimizes motor mass while maximizing output power. This paper presents a faster optimization algorithm that hybridizes Genetic Algorithm and Artificial Neural Network (ANN)-based surrogate modeling to optimize the motor for multi-objective goals. The proposed framework employs a multi-objective approach targeting maximum torque output and efficiency within a minimum motor mass. This approach, using an ANN-based surrogate, significantly reduces optimization time by saving 95% of the time compared to FEM simulations. The optimized 1 MW motor attains 98% efficiency and an active power density of 24.87 kW kg−1. The various stages of the optimization are presented in detail and a comparison of the time saving using the proposed algorithm is outlined. To demonstrate the feasibility of design, a detailed electromagnetic analysis, stator thermal analysis with a jet impingement design, and magnet demagnetization risk analysis were also presented.
Zitieren
APA
Pillai, S., Zaher, I., Abdalmagid, M., & Emadi, A. (2026). Multi-Objective Design Optimization of a MW Machine Using Hybrid Evolutionary Algorithm and Artificial Neural Networks. Machines, 14(4), 408. https://doi.org/10.3390/machines14040408
Vancouver
Pillai S, Zaher I, Abdalmagid M, Emadi A. Multi-Objective Design Optimization of a MW Machine Using Hybrid Evolutionary Algorithm and Artificial Neural Networks. Machines. 2026;14(4):408. doi:10.3390/machines14040408
BibTeX
@article{Pillai2026,
author = {Pillai, Srikanth and Zaher, Islam and Abdalmagid, Mohamed and Emadi, Ali},
title = {Multi-Objective Design Optimization of a MW Machine Using Hybrid Evolutionary Algorithm and Artificial Neural Networks},
journal = {Machines},
year = {2026},
volume = {14},
number = {4},
pages = {408},
doi = {10.3390/machines14040408}
}
EUVIMED